How to replace the MAP Sensor on 2005 Chevrolet SSR?

The replacement process of manifold absolute pressure (MAP) sensor begins by taking out the engine sight shield along with the mounting bracket. You need to remove the manifold absolute pressure (MAP) sensor's electrical connector and extracting the retaining clip before proceeding. Bring out the MAP Sensor and seal from the Intake Manifold after removing them both. Place the MAP Sensor with the seal into the Intake Manifold and secure them using the retaining clip and reconnect the electrical connector before reinstalling the engine sight shield with its mounting bracket.

OEM 2005 Chevrolet SSR MAP Sensor

Manifold Air Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 MAP Sensor found

View related parts
2005 Chevrolet SSR M.A.P. Sensor Part Number: 19418808
$73.36 MSRP: $125.98
You Save: $52.62 (42%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Sensor, Computer Control Sensors; MAP Sensor; Valve Assembly
- Replaces: 16249939, 09359409, 12614973, 16187556, 9359409
- Condition: New
- SKU: 19418808
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2005 Chevrolet SSR Submodels:
- Base | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS

2005 Chevrolet SSR MAP Sensor

With a comprehensive array of OEM 2005 Chevrolet SSR MAP Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 Chevrolet SSR MAP Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2005 Chevrolet SSR MAP Sensor Parts and Q&A

Q: How to replace the MAP Sensor on 2005 Chevrolet SSR?
A: The replacement process of manifold absolute pressure (MAP) sensor begins by taking out the engine sight shield along with the mounting bracket. You need to remove the manifold absolute pressure (MAP) sensor's electrical connector and extracting the retaining clip before proceeding. Bring out the MAP Sensor and seal from the Intake Manifold after removing them both. Place the MAP Sensor with the seal into the Intake Manifold and secure them using the retaining clip and reconnect the electrical connector before reinstalling the engine sight shield with its mounting bracket.