OEM 2005 Chevrolet Monte Carlo Air Filter

2005 Chevrolet Monte Carlo Air Filter Parts and Q&A

• Q: How to replace the air filter on 2005 Chevrolet Monte Carlo?

  A: First remove the positive crankcase ventilation (PCV) tube from the air cleaner intake duct after disconnecting the intake air temperature (IAT) sensor electrical connector. Start by separating the electrical connector of the mass air flow (MAF) sensor and release the air cleaner intake duct hose clamp. Start by removing the air cleaner intake duct from the Throttle Body before you unclip its 2 air cleaner cover clips to detach the air cleaner cover and adjacent duct assembly. Slide out the Air Filter that sits inside the air cleaner assembly. To reinstall the Air Filter into the assembly you should first put it into place before applying the air cleaner cover with air cleaner intake duct and sealing it using the two air cleaner cover clips. Fasten the air cleaner intake duct to the Throttle Body then secure it by tightening the clamp to 2 n.m (18 lb in). Connect maf sensor's electrical connector while reinstalling the pcv tube back into the air cleaner intake duct before final connection of iat sensor electrical connector.