How to replace the Power Steering Reservoir on 2005 Chevrolet Blazer?

The hydraulic pump should be on a flat surface with the shaft facing upwards to replace the power steering reservoir. To take out the reservoir, a screwdriver is used to pull off the reservoir clips and remove the reservoir. Unscrew the O-ring seal, grease a new seal with power steering fluid and screw it on to the reservoir and then reassemble.

OEM 2005 Chevrolet Blazer Power Steering Reservoir

Power Steering Fluid Reservoir Tank

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Power Steering Reservoir found

View related parts
2005 Chevrolet Blazer Reservoir Tank Part Number: 26046753
Product Specifications
- Other Name: Reservoir Kit, Steering Pump; Power Steering Reservoir; Reservoir; Reservoir Kit, Power Brake Booster
- Item Weight: 1.60 Pounds
- Item Dimensions: 9.7 x 8.6 x 7.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 26046753
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Blazer Submodels:
- Base, LS, LT, Trailblazer, Xtreme, ZR2 | 6 Cyl 4.3 L GAS

2005 Chevrolet Blazer Power Steering Reservoir

With a comprehensive array of OEM 2005 Chevrolet Blazer Power Steering Reservoir, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 Chevrolet Blazer Power Steering Reservoir are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2005 Chevrolet Blazer Power Steering Reservoir Parts and Q&A

Q: How to replace the Power Steering Reservoir on 2005 Chevrolet Blazer?
A: The hydraulic pump should be on a flat surface with the shaft facing upwards to replace the power steering reservoir. To take out the reservoir, a screwdriver is used to pull off the reservoir clips and remove the reservoir. Unscrew the O-ring seal, grease a new seal with power steering fluid and screw it on to the reservoir and then reassemble.