How to replace the Ignition Control Module on 2005 Buick Rendezvous?

In order to change the Ignition Control Module, all electrical connectors should be disconnected and the locations of the spark plug wires are to be noted. Unscrew screws holding coils assemblies and loosen them. Removal of an ignition control module in the engine bracket. Reconnect the spark plug wires and electrical connections, install the module, coils and fasteners.

OEM 2005 Buick Rendezvous Ignition Control Module

Ignition Spark Control Module

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Ignition Control Module found

View related parts
2005 Buick Rendezvous Control Module Part Number: 19245557
$221.80 MSRP: $455.78
You Save: $233.98 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module Assembly, Electronic Ignition Control (W/O Coil); Ignition Control Module; Ignition Module; Coil Module; Module; Bracket, Distributor (Also Knock Sensor); Module, Distributor (Also Knock Sensor)
- Replaces: 10489422
- Item Weight: 1.00 Pounds
- Item Dimensions: 7.8 x 4.7 x 1.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19245557
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Buick Rendezvous Submodels:
- CX, CX Plus, CXL, CXL Plus | 6 Cyl 3.4 L GAS

2005 Buick Rendezvous Ignition Control Module

With a comprehensive array of OEM 2005 Buick Rendezvous Ignition Control Module, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 Buick Rendezvous Ignition Control Module are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2005 Buick Rendezvous Ignition Control Module Parts and Q&A

Q: How to replace the Ignition Control Module on 2005 Buick Rendezvous?
A: In order to change the Ignition Control Module, all electrical connectors should be disconnected and the locations of the spark plug wires are to be noted. Unscrew screws holding coils assemblies and loosen them. Removal of an ignition control module in the engine bracket. Reconnect the spark plug wires and electrical connections, install the module, coils and fasteners.