How to replace the canister purge valves on 2005 Buick Rendezvous?

To remove evaporative emission (EVAP) canister purge solenoid valve, turn off the ignition first. Then disconnect the electrical connector from the evap canister purge valve, remove the evap canister purge pipe and vacuum supply hose from the valve as well. The elbow valve should be disconnected, and it should be allowed to slide towards the hose. After that, disconnect the evap canister purge valve and loosen the vacuum line that is still attached to the valve's base. For installation, place the new evap canister purge valve on the Intake Manifold and fasten it to the valve by using the retaining bolt, taking a value of 89 lb in (10 N.m). Then reconnect the evap canister purge pipe and the vacuum supply hose and the electrical connector for the evap canister purge valve.

OEM 2005 Buick Rendezvous Canister Purge Valves

Fuel Tank Evaporator Purge Control Valve

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Canister Purge Valves found

View related parts
2005 Buick Rendezvous Vent Valve Part Number: 10449092
$32.64 MSRP: $61.30
You Save: $28.66 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve Assembly-Evaporator Emission Canister Vent Solenoid; Valve, Fuel Tank Evaporator/Purge Control
- Item Weight: 0.60 Pounds
- Item Dimensions: 9.5 x 5.1 x 3.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10449092
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Buick Rendezvous Submodels:
- CX, CX Plus, CXL, CXL Plus | 6 Cyl 3.4 L GAS
View related parts
2005 Buick Rendezvous Solenoid Valve Part Number: 10384305
$67.38 MSRP: $136.86
You Save: $69.48 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Solenoid Assembly-Evaporator Emission Canister; Vapor Canister Purge Solenoid; Vapor Canister Vent Solenoid; Purge Solenoid; Vent Valve; Solenoid, Fuel Tank Evaporator/Purge Control; Valve, Fuel Tank Evaporator/Purge Control
- Replaces: 10332830
- Item Weight: 0.70 Pounds
- Item Dimensions: 13.1 x 8.4 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10384305
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Buick Rendezvous Submodels:
- CX, CXL, CXL Plus, Ultra | 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
View related parts
2005 Buick Rendezvous Purge Valve Part Number: 1997297
Product Specifications
- Other Name: Valve Assembly-Evaporator Emission Canister Purge Solenoid; Vapor Canister Vent Solenoid.; Purge Solenoid; Vapor Canister; Purge Control Valve; Valve, Fuel Tank Evaporator/Purge Control
- Item Weight: 0.50 Pounds
- Item Dimensions: 4.6 x 2.9 x 2.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1997297
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Buick Rendezvous Submodels:
- CX, CX Plus, CXL, CXL Plus | 6 Cyl 3.4 L GAS

2005 Buick Rendezvous Canister Purge Valves

With a comprehensive array of OEM 2005 Buick Rendezvous Canister Purge Valves, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 Buick Rendezvous Canister Purge Valves are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2005 Buick Rendezvous Canister Purge Valves Parts and Q&A

Q: How to replace the canister purge valves on 2005 Buick Rendezvous?
A: To remove evaporative emission (EVAP) canister purge solenoid valve, turn off the ignition first. Then disconnect the electrical connector from the evap canister purge valve, remove the evap canister purge pipe and vacuum supply hose from the valve as well. The elbow valve should be disconnected, and it should be allowed to slide towards the hose. After that, disconnect the evap canister purge valve and loosen the vacuum line that is still attached to the valve's base. For installation, place the new evap canister purge valve on the Intake Manifold and fasten it to the valve by using the retaining bolt, taking a value of 89 lb in (10 N.m). Then reconnect the evap canister purge pipe and the vacuum supply hose and the electrical connector for the evap canister purge valve.