How to replace the coil spring insulators on 2005 Buick Park Avenue?

Begin by supporting and raising the vehicle so the Control Arm can freely hang in the air before starting replacement of coil spring insulators. Start by removing the wheel assembly followed by using a jack stand to support the lower Control Arm. Start by unscrewing both absorber lower retaining bolts and the adjustment link retaining nut. Seal damage must be avoided during linkage joint separation procedures because insertion of a wedge tool between components results in damage. To split the adjustment link from the knuckle you must use the universal steering linkage puller (J 24319-B). Start by placing the Control Arm on the support assembly and using a downward warner to access the lower Coil Spring Insulator. They then extract the coil spring with its insulator. Follow additional instructions to remove the upper insulator while pulling it down. To install the component start by inserting the retainer from the upper insulator into the vehicle body before installing both the lower insulator and coil spring while verifying the insulator finds its seat in the Control Arm. Wedge the lower Control Arm to maximum height while installing shock absorber lower retaining bolts at a torque setting of 24 nm (18 ft. Lbs.). Attach the adjustment link to the Control Arm before tightening the adjustment link retaining nut to 50 nm (36 ft. Lbs.). As a final step install the automatic level control air tube to the shock absorber then reinstall the tire along with the wheel before lowering the vehicle.

OEM 2005 Buick Park Avenue Coil Spring Insulator

Coil Spring Noise Insulator

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Coil Spring Insulators found

View related parts
2005 Buick Park Avenue Spring Seat, Front Part Number: 22181835
$10.45 MSRP: $17.22
You Save: $6.77 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator, Front Spring; Coil Spring Insulator; Lower Retainer; Spring Insulator; Lower Spring Insulator; Lower Insulator; Dust Cover Lower Insulator; Lower Seat
- Position: Front
- Replaces: 22172025, 22172414
- Item Weight: 0.90 Pounds
- Item Dimensions: 8.4 x 6.7 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22181835
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Buick Park Avenue Submodels:
- Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
2005 Buick Park Avenue Spring Seat, Rear Passenger Side Part Number: 25710008
$114.08 MSRP: $250.56
You Save: $136.48 (55%)
ADD TO CART
Product Specifications
- Other Name: Seat-Rear Spring; Rail Assembly Seat; Seat, Rear Spring And Shock Absorber Anchor
- Position: Rear Passenger Side
- Item Weight: 4.40 Pounds
- Item Dimensions: 8.9 x 7.4 x 3.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25710008
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Buick Park Avenue Submodels:
- Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
2005 Buick Park Avenue Spring Seat, Rear Driver Side Part Number: 25710009
$63.91 MSRP: $114.13
You Save: $50.22 (44%)
Product Specifications
- Other Name: Seat-Rear Spring; Rail Assembly Seat; Seat, Rear Spring And Shock Absorber Anchor
- Position: Rear Driver Side
- Item Weight: 2.60 Pounds
- Item Dimensions: 13.1 x 8.4 x 7.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25710009
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Buick Park Avenue Submodels:
- Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
2005 Buick Park Avenue Spring Seat, Front Part Number: 22189859
Product Specifications
- Other Name: Seat, Front Spring
- Position: Front
- Item Weight: 0.60 Pounds
- Item Dimensions: 6.1 x 5.7 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 22189859
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Buick Park Avenue Submodels:
- Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
2005 Buick Park Avenue Spring Insulator, Rear Part Number: 25703339
Product Specifications
- Other Name: Bumper, Rear Axle; Coil Spring Insulator; Spring Bumper; Upper Insulator; Spring Upper Insulator; Bumper; Bumper, Rear Spring
- Position: Rear
- Item Weight: 0.80 Pounds
- Item Dimensions: 6.4 x 6.5 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 25703339
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Buick Park Avenue Submodels:
- Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
2005 Buick Park Avenue Spring Insulator, Front Part Number: 22189860
Product Specifications
- Other Name: Insulator, Front Spring; Coil Spring Insulator; Upper Insulator; Upper Spring Insulator
- Position: Front
- Item Weight: 0.50 Pounds
- Item Dimensions: 6.8 x 6.7 x 0.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22189860
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Buick Park Avenue Submodels:
- Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
2005 Buick Park Avenue Spring Insulator, Rear Lower Part Number: 25627582
Product Specifications
- Other Name: Insulator, Rear Spring Lower; Coil Spring Insulator; Lower Insulator; Spring Lower Insulator; Insulator; Insulator, Rear Spring
- Position: Rear Lower
- Item Weight: 1.60 Pounds
- Item Dimensions: 7.8 x 7.2 x 4.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 25627582
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Buick Park Avenue Submodels:
- Base, Ultra | 6 Cyl 3.8 L GAS

2005 Buick Park Avenue Coil Spring Insulator

With a comprehensive array of OEM 2005 Buick Park Avenue Coil Spring Insulator, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 Buick Park Avenue Coil Spring Insulator are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2005 Buick Park Avenue Coil Spring Insulator Parts and Q&A

Q: How to replace the coil spring insulators on 2005 Buick Park Avenue?
A: Begin by supporting and raising the vehicle so the Control Arm can freely hang in the air before starting replacement of coil spring insulators. Start by removing the wheel assembly followed by using a jack stand to support the lower Control Arm. Start by unscrewing both absorber lower retaining bolts and the adjustment link retaining nut. Seal damage must be avoided during linkage joint separation procedures because insertion of a wedge tool between components results in damage. To split the adjustment link from the knuckle you must use the universal steering linkage puller (J 24319-B). Start by placing the Control Arm on the support assembly and using a downward warner to access the lower Coil Spring Insulator. They then extract the coil spring with its insulator. Follow additional instructions to remove the upper insulator while pulling it down. To install the component start by inserting the retainer from the upper insulator into the vehicle body before installing both the lower insulator and coil spring while verifying the insulator finds its seat in the Control Arm. Wedge the lower Control Arm to maximum height while installing shock absorber lower retaining bolts at a torque setting of 24 nm (18 ft. Lbs.). Attach the adjustment link to the Control Arm before tightening the adjustment link retaining nut to 50 nm (36 ft. Lbs.). As a final step install the automatic level control air tube to the shock absorber then reinstall the tire along with the wheel before lowering the vehicle.