ChevyParts
My Garage
My Account
Cart
OEM 2005 Buick Century Alternator
Generator- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
1 Alternator found
2005 Buick Century Alternator Part Number: 22708250
Product Specifications- Other Name: Generator Assembly *Math Data; Generator, Engine Electrical
- Item Weight: 13.20 Pounds
- Item Dimensions: 10.0 x 8.3 x 8.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22708250
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2005 Buick Century Alternator
With a comprehensive array of OEM 2005 Buick Century Alternator, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 Buick Century Alternator are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2005 Buick Century Alternator Parts and Q&A
- Q: How to replace the alternator on 2005 Buick Century?A: The replacement process begins with negative Battery Cable disconnect followed by Drive Belt removal from the generator. You must move the coolant recovery reservoir out of the way for better access before you remove the generator rear brace nut and its bolts (1, 2, 3). Detach the electrical connector and pull off the protective boot covering the generator output bat terminal then disconnect the generator output bat terminal nut to free the positive battery lead. Move the generator out of its installed location. Position the generator to the engine then connect the positive battery lead before tightening the generator output bat terminal nut to 20 n.m (15 lb ft). After installing the generator output bat terminal nut and protective boot you should connect the electrical connector. First install the generator bolts (2, 3) until they reach position without full torque then install and loosely tighten the generator pivot bolt. Apply torque to generator bolts according to this required sequence: generator pivot bolt to 50 n.m (37 lb ft), generator bolt to 50 n.m (37 lb ft), and generator bolt to 50 n.m (37 lb ft). Begin the generator pivot bolt torque at 50 n.m before moving to the generator bolts at 50 n.m and finally the generator bolt at 50 n.m. After installing the generator rear brace nut tighten it to 25 n.m (18 lb ft) before reinstalling the coolant recovery reservoir and Drive Belt and reconnecting the negative Battery Cable.
