How to replace the Rack and Pinion Boot on 2004 Chevrolet Venture?

To get rid of the rack and pinion boot, prepare Keystone Clamp Pliers. Unscrew the outer tie rod, hex jam nut, loosen the boot clamp and the old boot. Fit a new boot clamp, grease and fit the new boot. Make sure that it is in place and then crimp the clamp and refit the tie rod.

OEM 2004 Chevrolet Venture Rack and Pinion Boot

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Rack and Pinion Boot found

View related parts
2004 Chevrolet Venture Tie Rod Boot Part Number: 21011025
Product Specifications
- Other Name: Boot Kit, Steering Tie Rod; Power Steering Cylinder; Rack and Pinion Bellows Kit; Rack & Pinion Boot.; Inner Tie Rod Boot; Boot Kit; Boot; Boot Kit, Tie Rod End Dust
- Item Weight: 0.80 Pounds
- Item Dimensions: 12.0 x 4.3 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 21011025
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Venture Submodels:
- Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS

2004 Chevrolet Venture Rack and Pinion Boot

With a comprehensive array of OEM 2004 Chevrolet Venture Rack and Pinion Boot, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2004 Chevrolet Venture Rack and Pinion Boot are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2004 Chevrolet Venture Rack and Pinion Boot Parts and Q&A

Q: How to replace the Rack and Pinion Boot on 2004 Chevrolet Venture?
A: To get rid of the rack and pinion boot, prepare Keystone Clamp Pliers. Unscrew the outer tie rod, hex jam nut, loosen the boot clamp and the old boot. Fit a new boot clamp, grease and fit the new boot. Make sure that it is in place and then crimp the clamp and refit the tie rod.