How to replace the front cross-member for the steering gear on 2004 Chevrolet Trailblazer?

First, to lower the car while lifting the vehicle, enable the vehicle's wheels to slide along the relevant concentrated sides of the hoisting support according to the lift's elevating height degrees estimation. Unbolt the engine shield mounting bolts, then remove the engine shield. Subsequently, remove the rear lower Control Arm Bracket to frame mounting bolts and the steering gear crossmember mounting bolts to remove the steering gear crossmember. During the installation, start with the steering gear crossmember and make sure that you read the fastener notice in service precautions. Tighten the steering gear crossmember with its mounting bolts, to 50 n.m (37 lb ft). Then, bolt the rear lower Control Arm Bracket to frame mounting bolts while tightening them to 240 n.m (177 lb ft). After that, replace the engine shield and mounting bolts, tightening to 25 n.m (18 lb ft), and, ultimately, lower the vehicle.

OEM 2004 Chevrolet Trailblazer Front Cross-Member

Front Engine Cross Member

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Front Cross-Members found

View related parts
2004 Chevrolet Trailblazer Transmission Support Part Number: 15090722
Product Specifications
- Other Name: Crossmember, Transmission Support; Transfer Case Mount; Transmission Mount; Trans Crossmember; Crossmember, Transmission Mounting
- Replaces: 15020364
- Item Weight: 10.90 Pounds
- Item Dimensions: 7.8 x 36.8 x 3.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15090722
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Trailblazer Submodels:
- Base, LS, LT, LTZ, North Face, SS | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
2004 Chevrolet Trailblazer Front Crossmember Part Number: 15085421
Product Specifications
- Other Name: Crossmember, Intermediate (Transmission Support Cross Member); Crossmember; Crossmember, Intermediate(Transmission Support Cross Member)
- Item Weight: 11.10 Pounds
- Item Dimensions: 32.8 x 10.6 x 3.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15085421
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Trailblazer Submodels:
- Base, LS, LT, LTZ, North Face, SS | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS

2004 Chevrolet Trailblazer Front Cross-Member

With a comprehensive array of OEM 2004 Chevrolet Trailblazer Front Cross-Member, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2004 Chevrolet Trailblazer Front Cross-Member are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2004 Chevrolet Trailblazer Front Cross-Member Parts and Q&A

Q: How to replace the front cross-member for the steering gear on 2004 Chevrolet Trailblazer?
A: First, to lower the car while lifting the vehicle, enable the vehicle's wheels to slide along the relevant concentrated sides of the hoisting support according to the lift's elevating height degrees estimation. Unbolt the engine shield mounting bolts, then remove the engine shield. Subsequently, remove the rear lower Control Arm Bracket to frame mounting bolts and the steering gear crossmember mounting bolts to remove the steering gear crossmember. During the installation, start with the steering gear crossmember and make sure that you read the fastener notice in service precautions. Tighten the steering gear crossmember with its mounting bolts, to 50 n.m (37 lb ft). Then, bolt the rear lower Control Arm Bracket to frame mounting bolts while tightening them to 240 n.m (177 lb ft). After that, replace the engine shield and mounting bolts, tightening to 25 n.m (18 lb ft), and, ultimately, lower the vehicle.