How to replace the fuel pressure regulator on 2004 Chevrolet SSR?

In order to change the fuel pressure regulator, one should take out the engine sight shield and de-pressurize the fuel system. Disconnect vacuum line, wipe off area and remove regulator retainer. Install an O-ring and lubricate it. Before replacing the sight shield, reconnect the vacuum line, tighten the fuel cap and make sure there are no leaks before installing the sight shield.

OEM 2004 Chevrolet SSR Fuel Pressure Regulator

Fuel Tank Pressure Regulator

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Fuel Pressure Regulator found

View related parts
2004 Chevrolet SSR Fuel Pressure Regulator Part Number: 19245530
$100.49 MSRP: $188.72
You Save: $88.23 (47%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Regulator Kit, Fuel Pressure; Regulator Kit, Fuel Injection
- Replaces: 17113517, 17113536, 17113555, 89060420, 17113288, 17113678, 12574986, 17122592
- Item Weight: 3.10 Pounds
- Item Dimensions: 4.5 x 3.4 x 1.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19245530
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet SSR Submodels:
- Base | 8 Cyl 5.3 L GAS

2004 Chevrolet SSR Fuel Pressure Regulator

With a comprehensive array of OEM 2004 Chevrolet SSR Fuel Pressure Regulator, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2004 Chevrolet SSR Fuel Pressure Regulator are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2004 Chevrolet SSR Fuel Pressure Regulator Parts and Q&A

Q: How to replace the fuel pressure regulator on 2004 Chevrolet SSR?
A: In order to change the fuel pressure regulator, one should take out the engine sight shield and de-pressurize the fuel system. Disconnect vacuum line, wipe off area and remove regulator retainer. Install an O-ring and lubricate it. Before replacing the sight shield, reconnect the vacuum line, tighten the fuel cap and make sure there are no leaks before installing the sight shield.