How to replace the MAP Sensor on 2004 Chevrolet Silverado 1500?

To change the sensor of the MAP, remove the electrical connector and slowly pull the sensor upwards with a little rocking action. Check the sensor seal and change it, where necessary. Open the new seal and then reconnect the electrical connector and sensor.

OEM 2004 Chevrolet Silverado 1500 MAP Sensor

Manifold Air Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 MAP Sensor found

View related parts
2004 Chevrolet Silverado 1500 M.A.P. Sensor Part Number: 19418808
$73.36 MSRP: $125.98
You Save: $52.62 (42%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Sensor, Computer Control Sensors; MAP Sensor; Valve Assembly
- Replaces: 16249939, 09359409, 12614973, 16187556, 9359409
- Condition: New
- SKU: 19418808
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2004 Chevrolet Silverado 1500 Submodels:
- Base, Hybrid, LS, LT, LTZ, SS, WT, Z71 Off-Road | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX

2004 Chevrolet Silverado 1500 MAP Sensor

With a comprehensive array of OEM 2004 Chevrolet Silverado 1500 MAP Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2004 Chevrolet Silverado 1500 MAP Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2004 Chevrolet Silverado 1500 MAP Sensor Parts and Q&A

Q: How to replace the MAP Sensor on 2004 Chevrolet Silverado 1500?
A: To change the sensor of the MAP, remove the electrical connector and slowly pull the sensor upwards with a little rocking action. Check the sensor seal and change it, where necessary. Open the new seal and then reconnect the electrical connector and sensor.