How to replace the ignition coil housing on 2004 Chevrolet Malibu?

Begin by disconnecting the EI module harness connector while the ignition is OFF. First unscrew the ignition coil housing attachment bolts to remove the ignition coil housing and spark plug boot from the engine. Make sure you check that the interconnect is properly aligned before you install new ignition coil housing and verify that the interconnect seal remains in position. Spread dielectric compound on the spark plug boots while checking for any signs of corrosion. Position the ignition coil housing onto the cam cover before tightening the attachment bolts to 10 N.m (89 lb in). You should install the EI module by using its attachment screws following a tightness setting of 1.5 N.m (13 lb in). Connect the EI module harness connector while pushing it in to receive the click signal then verify positive attachment by pulling it back.

OEM 2004 Chevrolet Malibu Ignition Coil

Ignition Coil Resistor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Ignition Coils found

View related parts
2004 Chevrolet Malibu Ignition Coil Part Number: 19432144
$104.03 MSRP: $185.76
You Save: $81.73 (44%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Coil Assembly, Ignition; Ignition Module; Coil, Ignition Coil
- Replaces: 12587153, 12595088, 12568185
- Condition: New
- SKU: 19432144
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2004 Chevrolet Malibu Submodels:
- Classic LS, Classic LT, LS, LT, LTZ, Maxx, Maxx LS, Maxx LT, Maxx LTZ, Maxx SS, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
View related parts
2004 Chevrolet Malibu Ignition Coil Part Number: 12587426
Product Specifications
- Other Name: Coil Assembly-Ignition; Ignition Control Module; Ignition Module; Coil; Coil, Ignition Coil
- Item Weight: 2.70 Pounds
- Item Dimensions: 18.6 x 7.3 x 4.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12587426
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Malibu Submodels:
- Base, LS, LT | 4 Cyl 2.2 L GAS

2004 Chevrolet Malibu Ignition Coil

With a comprehensive array of OEM 2004 Chevrolet Malibu Ignition Coil, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2004 Chevrolet Malibu Ignition Coil are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2004 Chevrolet Malibu Ignition Coil Parts and Q&A

Q: How to replace the ignition coil housing on 2004 Chevrolet Malibu?
A: Begin by disconnecting the EI module harness connector while the ignition is OFF. First unscrew the ignition coil housing attachment bolts to remove the ignition coil housing and spark plug boot from the engine. Make sure you check that the interconnect is properly aligned before you install new ignition coil housing and verify that the interconnect seal remains in position. Spread dielectric compound on the spark plug boots while checking for any signs of corrosion. Position the ignition coil housing onto the cam cover before tightening the attachment bolts to 10 N.m (89 lb in). You should install the EI module by using its attachment screws following a tightness setting of 1.5 N.m (13 lb in). Connect the EI module harness connector while pushing it in to receive the click signal then verify positive attachment by pulling it back.