How to replace the engine oil pressure switch on 2004 Chevrolet Colorado?

In order to change the engine oil pressure sensor or switch, one should first raise and support the vehicle. Unscrew the wiring harness electrical connector on the oil pressure switch, eliminate the switch. Installation install the switch and tighten it. The second step is to attach the harness connector of the wiring to the switch and lower the car.

OEM 2004 Chevrolet Colorado Oil Pressure Switch

Oil Pressure Sender Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Oil Pressure Switch found

View related parts
2004 Chevrolet Colorado Pressure Switch Part Number: 12635957
$48.31 MSRP: $82.24
You Save: $33.93 (42%)
ADD TO CART
Product Specifications
- Other Name: Switch, Engine Oil Pressure/Temperature; Oil Pressure Gauge Switch; Sensor; Switch; Pressure Sensor; Oil Pressure Sending Unit; Switch
- Replaced by: 19436253
- Replaces: 12611588, 12570964, 12590793, 12579946
- Item Weight: 0.40 Pounds
- Item Dimensions: 3.1 x 2.2 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12635957
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Colorado Submodels:
- Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.7 L GAS

2004 Chevrolet Colorado Oil Pressure Switch

With a comprehensive array of OEM 2004 Chevrolet Colorado Oil Pressure Switch, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2004 Chevrolet Colorado Oil Pressure Switch are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2004 Chevrolet Colorado Oil Pressure Switch Parts and Q&A

Q: How to replace the engine oil pressure switch on 2004 Chevrolet Colorado?
A: In order to change the engine oil pressure sensor or switch, one should first raise and support the vehicle. Unscrew the wiring harness electrical connector on the oil pressure switch, eliminate the switch. Installation install the switch and tighten it. The second step is to attach the harness connector of the wiring to the switch and lower the car.