Make sure this part fits

GM 12635957
Pressure Switch

2002-2017 GM

Customer Questions & Expert Answers (13)
GM 12635957 Pressure Switch
GM 12635957 Pressure Switch
  • Part Description
    Switch, Engine Oil Pressure/Temperature; Oil Pressure Gauge Switch; Sensor; Switch
  • Replaced By
    19436253
  • Replaces
    12611588, 12570964, 12590793, 12579946
  • Manufacturer
    General Motors
Make sure this part fits
$48.31 MSRP: $82.24
You Save: $33.93 (42%)
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2008-2017 Buick EnclaveBase, Convenience, CX, CXL, Leather, Premium6 Cyl 3.6 L GAS
    2010-2016, 2008 Buick LaCrosseBase, Convenience, CX, CXL, CXS, Leather, Premium, Sport Touring, Touring4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
    2004 Buick RainierCXL, CXL Plus6 Cyl 4.2 L GAS
    2010-2016 Cadillac SRXBase, Luxury, Performance, Premium6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
    2013-2017 Cadillac XTSBase, Livery, Luxury, Platinum, Premium, Premium Luxury, Vsport Platinum, Vsport Premium6 Cyl 3.6 L GAS
    2012 Chevrolet Captiva SportLT, LTZ6 Cyl 3.0 L FLEX
    2004-2012 Chevrolet ColoradoBase, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.7 L GAS
    2010-2017 Chevrolet EquinoxLT, LTZ, Premier6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
    2012-2017 Chevrolet ImpalaLS, LT, LTZ, Police, Premier6 Cyl 3.6 L BI-FUEL, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
    2014-2016 Chevrolet Impala LimitedLS, LT, LTZ, Police6 Cyl 3.6 L FLEX
    View More
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 12635957 designed for my car? Posted by ChevyPartsDeal Specialist
    A:
    Please Select Your Vehicle model to see if part number 12635957 is suitable before ordering.
    Posted by ChevyPartsDeal Specialist
    Q:
    What tool is needed to remove the oil pressure sensor for the 2009 Buick Enclave? Posted by Customer
    A:
    Use the J 41712 (Oil Pressure Switch Socket).
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Oil Pressure Switch
    Q:
    What is the final step after installing the oil pressure sensor for the 2008 Buick LaCrosse? Posted by Customer
    A:
    Connect the oil pressure sensor electrical connector.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Oil Pressure Switch
    Q:
    What is the first step to replace the Engine Oil Pressure Sensor or Switch for the 2004 Buick Rainier? Posted by Customer
    A:
    First, raise the vehicle.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Oil Pressure Switch
    Q:
    What should be done after installing the new engine oil pressure switch for the 2008 Chevrolet Colorado? Posted by Customer
    A:
    Reconnect the engine wiring harness electrical connector to the oil pressure switch.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Oil Pressure Switch
    Q:
    What is the final step in the process for the 2010 Chevrolet Equinox? Posted by Customer
    A:
    Reinstall the starter.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Oil Pressure Switch
    Q:
    What should be done after installing the oil pressure sensor for the 2008 Chevrolet Malibu? Posted by Customer
    A:
    Connect the engine wiring harness electrical connector to the oil pressure sensor.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Oil Pressure Switch
    Q:
    What should be removed after raising for the 2003 Chevrolet Trailblazer? Posted by Customer
    A:
    Remove the engine shield.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Oil Pressure Switch
    Q:
    What should be done during the installation of the new oil pressure sensor for the 2007 GMC Acadia? Posted by Customer
    A:
    Ensure to install the oil pressure sensor and tighten it to 20 N.m (15 lb ft).
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Oil Pressure Switch
    Q:
    What is the torque specification for installing the oil pressure sensor for the 2009 Chevrolet Traverse? Posted by Customer
    A:
    Tighten it to 20 Nm (15 lb ft).
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Oil Pressure Switch
    Q:
    What needs to be disconnected before removing the oil pressure switch for the 2002 GMC Envoy? Posted by Customer
    A:
    Disconnect the electrical connector from the oil pressure switch.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Oil Pressure Switch
    Q:
    What is the torque specification for installing the engine oil pressure switch for the 2005 GMC Canyon? Posted by Customer
    A:
    Tighten it to 20 Nm (15 ft. lbs.).
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Oil Pressure Switch
    Q:
    What is the first step to replace the engine oil pressure switch for the 2010 GMC Terrain? Posted by Customer
    A:
    First, remove the starter.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Oil Pressure Switch
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Pressure Switch 12635957 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 12635957 Pressure Switch is available in the market under the name GM Oil Pressure Switch. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 12635957 Pressure Switch fits certain Chevrolet Colorado, Malibu, Equinox models, as well as GMC Acadia, Canyon, Terrain. Additionally, it is compatible with Cadillac SRX, XTS and Buick Enclave, LaCrosse, Rainier models.
The original GM component designated by Manufacturer Part Number 12635957 maintains top performance when functioning as the Switch, Engine Oil Pressure/Temperature; Oil Pressure Gauge Switch; Sensor; Switch unit. The component 12635957 is constructed from durable material and its dimensions span 3.1 x 2.2 x 2.1 inches while weighing 0.40 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Pressure Sensor; Oil Pressure Sending Unit; Switch. The part 12635957 has available replacement options listed under 19436253 or 12611588, 12570964, 12590793, 12579946. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts? Our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.