OEM 2004 Chevrolet Classic Seat Motor

2004 Chevrolet Classic Seat Motor Parts and Q&A

• Q: How to Replace a Front Seat Motor in a Power Seat on 2004 Chevrolet Classic?

  A: Start by positioning the front seat to its highest vertical level followed by seat removal before beginning the motor replacement process. Before extracting the vertical and horizontal drive cables from their respective actuators, users must apply force to the oblong connectors for cables (1,3) and disconnect motor electrical connectors (2,4,5). Start by removing the motor support bracket nut from the seat adjuster then use a tool to remove the retaining clip from the horizontal motor and finally remove the motor support bracket from the seat adjuster. Drill out the support bracket's rivets followed by motor removal (2,4,5) from this bracket. Starting with the grommet installation to the motor support bracket you can install the motor (2,4,5) with proper rivets into the grommet and bracket. Before completing the installation secure the motor support bracket nut on the seat adjuster until it reaches 8 N.m torque (70 lb in torque). Drop the retaining clip onto the horizontal motor before attaching drive cables (1,3) to vertical and horizontal actuators by connecting their connectors until you hear a loud audible snap. Purchase the electrical connectors before installing them to motors (1,2,3). Next install the front seat and return it to its original position.