OEM 2004 Cadillac SRX Ignition Coil

2004 Cadillac SRX Ignition Coil Parts and Q&A

• Q: How to replace the ignition coil for Bank 2 on 2004 Cadillac SRX?

  A: A successful Ignition Coil replacement for bank 2 requires turning off the ignition and removing the engine cover while maintaining fuel pipe and hose connections. To replace the cylinder 2 Ignition Coil first disconnect the air cleaner duct from the Throttle Body along with the positive crankcase ventilation (PCV) hose from right bank camshaft cover keeping the upper Intake Manifold secured to the lower Intake Manifold before proceeding with reposition tasks. Remove the Intake Manifold bolts then the Intake Manifold brace bolts (1 and 2) along with the brace before repositioning the upper Intake Manifold with the lower Intake Manifold to create enough space for Ignition Coil removal. First disconnect Ignition Coil electrical connector(s). Then remove Ignition Coil bolt(s) and finally extract the Ignition Coil(s). Install the ignition coils first before fastening each bolt to 10 n.m (89 lb in) torque specifications before plugging into the Ignition Coil electrical connectors. Reinstall the upper Intake Manifold only if needed.