How to replace the Air Bag Sensor for the side impact on 2004 Cadillac DeVille?

To replace the inflatable restraint side impact sensor (SIS), first turn off the SIR system. Do not hit the SIS and make sure that it is firmly fastened! Remove the center pillar trim panel, disconnect the SIS harness and remove the SIS. Clean the mounting surface, re-install the SIS and reconnect the harness. Finally, reinstall the trim and turn on the SIR system.

OEM 2004 Cadillac DeVille Air Bag Sensor

Air Bag Impact Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Air Bag Sensor found

View related parts
2004 Cadillac DeVille Front Impact Sensor Part Number: 25745936
$29.04 MSRP: $43.23
You Save: $14.19 (33%)
Product Specifications
- Other Name: Sensor Assembly-Inflatable Restraint Front End Discriminating; Air Bag Sensor; Sensor; Sensor, Inflatable Restraint System
- Position: Front
- Replaces: 25736252
- Item Weight: 0.40 Pounds
- Item Dimensions: 3.5 x 3.2 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25745936
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Cadillac DeVille Submodels:
- Base, DHS, DTS, Protection Series | 8 Cyl 4.6 L GAS

2004 Cadillac DeVille Air Bag Sensor

With a comprehensive array of OEM 2004 Cadillac DeVille Air Bag Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2004 Cadillac DeVille Air Bag Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2004 Cadillac DeVille Air Bag Sensor Parts and Q&A

Q: How to replace the Air Bag Sensor for the side impact on 2004 Cadillac DeVille?
A: To replace the inflatable restraint side impact sensor (SIS), first turn off the SIR system. Do not hit the SIS and make sure that it is firmly fastened! Remove the center pillar trim panel, disconnect the SIS harness and remove the SIS. Clean the mounting surface, re-install the SIS and reconnect the harness. Finally, reinstall the trim and turn on the SIR system.