ChevyParts
My Garage
My Account
Cart
OEM 2004 Buick Regal Alternator
Generator- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
1 Alternator found
2004 Buick Regal Alternator Part Number: 19244735
Product Specifications- Other Name: Generator Assembly, (Remanufacture); Generator, Engine Electrical
- Replaces: 10464496, 19151903, 10339422
- Item Weight: 13.20 Pounds
- Item Dimensions: 9.2 x 8.3 x 7.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19244735
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2004 Buick Regal Alternator
With a comprehensive array of OEM 2004 Buick Regal Alternator, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2004 Buick Regal Alternator are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2004 Buick Regal Alternator Parts and Q&A
- Q: How to replace an alternator on 2004 Buick Regal?A: The replacement process starts by disconnecting the negative cable along with belt removal from the drive system. Start by detaching the generator rear brace and eliminating bolts (1, 3) as well as stud from the generator. Before working on the generator you need to disconnect its electrical connector then move the protective boot covering the bat terminal of the generator output. Remove the generator output bat terminal nut and positive battery lead from the generator before removing it. Install the generator by positioning it next to the engine while connecting the positive battery lead following fastener notice in service precautions. Secure the generator output bat terminal nut by tightening it to 20 n.m (15 lb ft). Reattach the protective boot to the generator output bat terminal while linking its electrical connector to the generator. Starting with the generator bracket, install its stud but do it loosely before securing the bracket bolts (1, 3) without final tightening. Then, tighten the generator bolts and stud in the following mandatory torque sequence: the generator bolt needs a torque of 50 n.m (37 lb ft) before torquing the generator stud up to 50 n.m (37 lb ft) followed by the generator rear bracket bolt receiving a 50 n.m (37 lb ft) torque. Add the generator rear brace and Drive Belt before reattaching the negative Battery Cable.
