OEM 2003 GMC Sonoma Center Console

Floor Console Assembly
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Center Consoles found

  • 2003 GMC Sonoma Center Console - 15723000
    2003 GMC Sonoma Center Console Diagram - 15723000
    View related parts
    Product Specifications
    • Other Name: Console, Seat Separator Console
    • Position: Front
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 15723000
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    Fits the following 2003 GMC Sonoma Submodels:
    • SL, SLE, SLS | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
  • 2003 GMC Sonoma Center Console - 15722999
    2003 GMC Sonoma Center Console Diagram - 15722999
    View related parts
    Product Specifications
    • Other Name: Console A; Console, Seat Separator Console
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 15722999
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    Fits the following 2003 GMC Sonoma Submodels:
    • SL, SLE, SLS | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS

2003 GMC Sonoma Center Console

With a comprehensive array of OEM 2003 GMC Sonoma Center Console, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2003 GMC Sonoma Center Console are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2003 GMC Sonoma Center Console Parts and Q&A

  • Q: How to replace the front center console for a full-length manual transmission on 2003 GMC Sonoma?
    A: To replace the front floor console for full-length manual transmission, first; remove the shift control lever, Cup Holder, and the screws which fasten the trim plate to the console and take off the trim plate. Open the cover of the storage compartment and take out the storage compartment. The next step is using the nuts that secure the console on the vehicle to get them off, disconnect the electrical connector if you have one, to lift the console off its position. For installation, set the console back into the vehicle and plug the electrical connector if available. Tighten the nuts to fix the console to 10 n.m (88 lb in), and after that, the storage compartment. Reconnect the trim plate to the console and supporting it in with screws, while tightening each of them to 1.9 n.m (17 lb in). Last, replace the Cup Holder insert and the shift control lever.

Related 2003 GMC Sonoma Parts