How to replace the rear brake line on 2003 Chevrolet SSR?

First, lift the vehicle; tire and wheel assembly. Cleans all dirt and foreign substance from the brake hose and brake pipe fittings. Removing the rear brake hose from the brake pipe using a back up wrench and make sure you put a rubber plug or cap on the exposed brake pipe fitting ends to prevent brake fluid loss and contamination. Then unthread the Brake Line retainer bolt at frame and brake hose bolt on brake caliper and be aware that there is a possibility of metal gaskets that may be adhering to the brake caliper or brake hose end and discard the copper gaskets. When installing, put new copper gaskets on the rear Brake Caliper Bolt, and then connect the rear brake hose to rear brake caliper and tighten the rear brake bolt to 44 nm [23 ft. Lbs]. Take out the rubber plug or cap from the back brake pipe fittings and connect the brake pipe to the brake hose and using another wrench as back up wrench, tighten the rear brake pipe fitting to 20 nm (18 ft. Lbs). Install the brake pipe retaining bolt at the frame and tighten to 20 nm (18 ft. Lbs). Bleed the hydraulic brake system, change the tire and wheel assembly, and return the vehicle to the ground.

OEM 2003 Chevrolet SSR Brake Line

Brake Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Brake Lines found

View related parts
2003 Chevrolet SSR Flex Hose, Passenger Side Part Number: 15112267
Product Specifications
- Other Name: Hose, Hydraulic Brake; Hydraulic Hose; Brake Hose; Brake Line
- Position: Passenger Side
- Replaced by: 19366746
- Item Weight: 1.30 Pounds
- Item Dimensions: 3.1 x 25.5 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15112267
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Chevrolet SSR Submodels:
- Base | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
2003 Chevrolet SSR Flex Hose, Driver Side Part Number: 15112268
Product Specifications
- Other Name: Hose, Hydraulic Brake; Hydraulic Hose; Brake Hose; Brake Line
- Position: Driver Side
- Replaced by: 15786538
- Item Weight: 1.00 Pounds
- Item Dimensions: 26.9 x 4.7 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15112268
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Chevrolet SSR Submodels:
- Base | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
2003 Chevrolet SSR Flex Hose, Rear Driver Side Part Number: 19366744
Product Specifications
- Other Name: Hose Assembly, Rear Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Rear Driver Side
- Replaces: 15134754, 10372503
- Item Weight: 0.60 Pounds
- Item Dimensions: 2.0 x 14.3 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19366744
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Chevrolet SSR Submodels:
- Base | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
2003 Chevrolet SSR Flex Hose, Rear Part Number: 19366689
Product Specifications
- Other Name: Hose Assembly, Rear Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Rear
- Replaces: 15877297, 10372502, 15134755
- Item Weight: 1.30 Pounds
- Item Dimensions: 2.0 x 14.7 x 1.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19366689
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Chevrolet SSR Submodels:
- Base | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS

2003 Chevrolet SSR Brake Line

With a comprehensive array of OEM 2003 Chevrolet SSR Brake Line, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2003 Chevrolet SSR Brake Line are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2003 Chevrolet SSR Brake Line Parts and Q&A

Q: How to replace the rear brake line on 2003 Chevrolet SSR?
A: First, lift the vehicle; tire and wheel assembly. Cleans all dirt and foreign substance from the brake hose and brake pipe fittings. Removing the rear brake hose from the brake pipe using a back up wrench and make sure you put a rubber plug or cap on the exposed brake pipe fitting ends to prevent brake fluid loss and contamination. Then unthread the Brake Line retainer bolt at frame and brake hose bolt on brake caliper and be aware that there is a possibility of metal gaskets that may be adhering to the brake caliper or brake hose end and discard the copper gaskets. When installing, put new copper gaskets on the rear Brake Caliper Bolt, and then connect the rear brake hose to rear brake caliper and tighten the rear brake bolt to 44 nm [23 ft. Lbs]. Take out the rubber plug or cap from the back brake pipe fittings and connect the brake pipe to the brake hose and using another wrench as back up wrench, tighten the rear brake pipe fitting to 20 nm (18 ft. Lbs). Install the brake pipe retaining bolt at the frame and tighten to 20 nm (18 ft. Lbs). Bleed the hydraulic brake system, change the tire and wheel assembly, and return the vehicle to the ground.