How to replace the front sway bar link on 2003 Cadillac Escalade?

The first step to replace the sway bar link is to lift and support the vehicle. The first step involves removing the sway bar nut attaching the link bolt before progressing to remove the sway bar link bolt and finally taking out the sway bar link insulators and spacers. Check the complete parts set for signs of both damage and wear. The first step for replacement involves inserting the sway bar link insulators and spacers into their proper places. The installation of sway bar link bolts can begin after you verify the complete removal of preexisting adhesive patches between threads and add threadlocker gm p/n 12345382 (canadian p/n 10953489) blue loctite # 242. After that, add the sway bar link bolts then fasten the sway bar nut to the link bolt by tightening it at 10 N.m (89 lb in) while specifying 2-4 threads should exceed the nut length. Finish the installation process by removing safety stands before lowering the vehicle down to the floor.

OEM 2003 Cadillac Escalade Sway Bar Link

Stabilizer Sway Bar Link

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Sway Bar Links found

View related parts
2003 Cadillac Escalade Stabilizer Link Part Number: 15257472
$38.11 MSRP: $73.96
You Save: $35.85 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Link, Stabilizer Shaft; Suspension Stabilizer Bar Link Kit; Stabilizer Bar Link Kit; Sway Bar Link; Link
- Position: Rear
- Replaces: 15039569, 10386415
- Item Weight: 1.40 Pounds
- Item Dimensions: 10.2 x 3.7 x 1.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15257472
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Cadillac Escalade Submodels:
- Base, Hybrid, Hybrid Platinum, Luxury, Platinum, Premium, Premium Luxury | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
2003 Cadillac Escalade Stabilizer Link Part Number: 10385580
$38.05 MSRP: $74.47
You Save: $36.42 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Link, Stabilizer Shaft; Suspension Stabilizer Bar Link Kit; Control Arm; Sway Bar Link; Link
- Position: Front
- Replaces: 15033684, 15070821
- Item Weight: 1.00 Pounds
- Item Dimensions: 9.2 x 2.2 x 1.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10385580
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Cadillac Escalade Submodels:
- Base | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS

2003 Cadillac Escalade Sway Bar Link

With a comprehensive array of OEM 2003 Cadillac Escalade Sway Bar Link, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2003 Cadillac Escalade Sway Bar Link are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2003 Cadillac Escalade Sway Bar Link Parts and Q&A

Q: How to replace the front sway bar link on 2003 Cadillac Escalade?
A: The first step to replace the sway bar link is to lift and support the vehicle. The first step involves removing the sway bar nut attaching the link bolt before progressing to remove the sway bar link bolt and finally taking out the sway bar link insulators and spacers. Check the complete parts set for signs of both damage and wear. The first step for replacement involves inserting the sway bar link insulators and spacers into their proper places. The installation of sway bar link bolts can begin after you verify the complete removal of preexisting adhesive patches between threads and add threadlocker gm p/n 12345382 (canadian p/n 10953489) blue loctite # 242. After that, add the sway bar link bolts then fasten the sway bar nut to the link bolt by tightening it at 10 N.m (89 lb in) while specifying 2-4 threads should exceed the nut length. Finish the installation process by removing safety stands before lowering the vehicle down to the floor.