ChevyParts
My Garage
My Account
Cart
OEM 2003 Cadillac CTS Battery Cable
Car Battery Cable- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
3 Battery Cables found
2003 Cadillac CTS Positive Cable Part Number: 25736491
Product Specifications- Other Name: Cable Assembly-Battery Positive; Battery Cables; Cable, Battery(Positive)
- Item Weight: 2.30 Pounds
- Item Dimensions: 3.1 x 21.6 x 20.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25736491
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2003 Cadillac CTS Negative Cable Part Number: 25752158
Product Specifications- Other Name: Cable Assembly-Battery Negative; Cable, Battery Ground(Negative)
- Replaces: 25742031
- Item Weight: 1.50 Pounds
- Item Dimensions: 9.8 x 3.5 x 3.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25752158
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2003 Cadillac CTS Negative Cable Part Number: 25742032
Product Specifications- Other Name: Cable Assembly-Battery Negative; Battery Cables; Ground Strap; Cable, Battery Ground(Negative)
- Item Weight: 1.50 Pounds
- Item Dimensions: 11.2 x 12.9 x 5.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25742032
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2003 Cadillac CTS Battery Cable
With a comprehensive array of OEM 2003 Cadillac CTS Battery Cable, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2003 Cadillac CTS Battery Cable are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2003 Cadillac CTS Battery Cable Parts and Q&A
- Q: How to replace the negative battery cable (RHD) on 2003 Cadillac CTS?A: Disconnect the battery negative cable (RHD) first. Unbolt the battery negative wire to the side rail and take the body harness connector of the battery negative wire. Lift and lift the vehicle and remove the bolt fixing the battery negative cable to the engine block and remove the cable from the engine. Installation must involve connection of the new battery negative cable to the engine and a locking bolt into the engine-block using 50 n.m (37 lb ft). Lower the vehicle and fit the bolt that takes the battery negative cable to the side rail, squeezed it to 36 n.m (27 lb ft). Finally, connect your body harness connector to your battery negative cable and reconnect the battery negative cable. Always ensure the replacement cables are the same type, diameter width, and length as the original cables, and follow the same course of the original.
