How to replace or repair an emblem/nameplate on 2003 Buick Regal?

Apply tape to the emblem surface and mark the panel with additional tape before putting on the new part. Use a Heat Gun model J 25070 to warm up the emblem/nameplate for thirty seconds while focusing the heat in a circular pattern. A plastic flatblade tool will help you take off the nameplate from the painted surface without breaking the paint. Choose either a 3M(TM) Scotch Brite molding adhesive remover disk (3M(TM) P/N 07502) for body panel or use a lint-free cloth with VMP naphtha or a 50/50 isopropyl alcohol and water mix to clean adhesive from plastic panels. Make sure dust particles do not affect your work area before starting the installation process. Clean the panel area with a lint-free cloth saturated in VMP naphtha or alcohol-water combination before letting it completely air dry. Mark the panel placement with tape before heating the surface to 80-105°F. Place the emblem/nameplate over its mounting area while the temperature is still 85-90°F. You should place the nameplate on its marked location by removing the protective film and firmly pressing it against the heating surface with uniform pressure. Finish by taking off the protective tape from the marked surface.

OEM 2003 Buick Regal Emblem

Badge

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Emblems found

View related parts
2003 Buick Regal Emblem, Front Part Number: 10273068
Product Specifications
- Other Name: Emblem, Radiator Grille And Front End Ornamentation
- Position: Front
- Item Weight: 0.30 Pounds
- Item Dimensions: 3.8 x 3.6 x 0.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10273068
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Buick Regal Submodels:
- 25th Anniversary Edition, GS, GSE, LS, LSE | 6 Cyl 3.8 L GAS
View related parts
2003 Buick Regal Emblem, Rear Part Number: 25602037
Product Specifications
- Other Name: Plate Assembly-Rear Compartment Lid Name; Nameplate; Plate,Rear End Panel And Tailgate
- Position: Rear
- Item Weight: 0.30 Pounds
- Item Dimensions: 6.4 x 1.1 x 0.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25602037
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Buick Regal Submodels:
- GS, GSE | 6 Cyl 3.8 L GAS
View related parts
2003 Buick Regal Emblem, Rear Part Number: 10316010
Product Specifications
- Other Name: Plate, Rear Compartment Lid, Rear End Panel And Tailgate; Nameplate; Plate,Rear End Panel And Tailgate
- Position: Rear
- Item Weight: 0.30 Pounds
- Item Dimensions: 7.0 x 4.8 x 0.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10316010
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Buick Regal Submodels:
- GS, LS | 6 Cyl 3.8 L GAS
View related parts
2003 Buick Regal Emblem, Front Part Number: 10446599
Product Specifications
- Other Name: Emblem, Radiator Grille And Front End Ornamentation
- Position: Front
- Item Weight: 0.30 Pounds
- Item Dimensions: 3.9 x 3.9 x 0.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10446599
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Buick Regal Submodels:
- GS, LS | 6 Cyl 3.8 L GAS
View related parts
2003 Buick Regal Emblem, Rear Part Number: 10303379
Product Specifications
- Other Name: Emblem, Rear Compartment Lid, Rear End Panel And Tailgate; Plate,Rear End Panel And Tailgate
- Position: Rear
- Item Weight: 0.30 Pounds
- Item Dimensions: 3.1 x 2.2 x 0.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10303379
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Buick Regal Submodels:
- GS, LS | 6 Cyl 3.8 L GAS

2003 Buick Regal Emblem

With a comprehensive array of OEM 2003 Buick Regal Emblem, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2003 Buick Regal Emblem are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2003 Buick Regal Emblem Parts and Q&A

Q: How to replace or repair an emblem/nameplate on 2003 Buick Regal?
A: Apply tape to the emblem surface and mark the panel with additional tape before putting on the new part. Use a Heat Gun model J 25070 to warm up the emblem/nameplate for thirty seconds while focusing the heat in a circular pattern. A plastic flatblade tool will help you take off the nameplate from the painted surface without breaking the paint. Choose either a 3M(TM) Scotch Brite molding adhesive remover disk (3M(TM) P/N 07502) for body panel or use a lint-free cloth with VMP naphtha or a 50/50 isopropyl alcohol and water mix to clean adhesive from plastic panels. Make sure dust particles do not affect your work area before starting the installation process. Clean the panel area with a lint-free cloth saturated in VMP naphtha or alcohol-water combination before letting it completely air dry. Mark the panel placement with tape before heating the surface to 80-105°F. Place the emblem/nameplate over its mounting area while the temperature is still 85-90°F. You should place the nameplate on its marked location by removing the protective film and firmly pressing it against the heating surface with uniform pressure. Finish by taking off the protective tape from the marked surface.