How to Replace or Repair a Rear Fascia Emblem on Buick Regal?

Before working on a Buick rear fascia emblem/nameplate you need to apply tape to prevent damage while setting up installation marks. Use a Heat Gun model J 25070 to warm the emblem/nameplate by moving the gun in circles for 30 seconds. You should use a plastic tool to lift off the emblem/nameplate when removing it from the panel surface to avoid paint damage. Clean neither the panel surface nor the molding tape with adhesive remover and a pad after removing the damaged tape from either part. Replace the tape when your work continues. Press the adhesive foam tape onto the back of the emblem/nameplate before fitting it to the proper spot. You need the 3M(TM) Scotch Brite molding adhesive remover disk P/N 07501 to remove adhesive from body panels while using a lint-free cloth soaked with VMP naphtha or a 50/50 isopropyl alcohol mixture for plastic panels. Thoroughly wipe the installation region with a lint-free cloth and VMP naphtha or alcohol-water solution before drying it properly to prepare the space free from dust. Mark tape placement spots when no original locations are given. Apply proper temperatures of 27-41°C (80-105°F) to the mounting surface and keep the emblem/nameplate at 29-32°C (85-90°F). Put the emblem/nameplate on the mounting surface at the marked spots and push it tightly by giving it equal pressure all over. After placing the emblem/nameplate on the right spot, peel off the protective tape from the surface.

How to replace or repair a front emblem on Buick Regal?

Before putting in the new nameplate tape off both the mount surface and the replacement itself to help align the parts during assembly. Apply the J 25070 heat gun (J 25070) in circular motions for 30 seconds to heat the nameplate. Use a plastic flat blade to gently take off the nameplate from its surface. Use 3M scotch brite molding adhesive remover disk P/N 07502 or equivalent to clean adhesive from body panels while using vmp naphtha or isopropyl alcohol mixture with water on plastic panels. Use clean dry space for installation and apply tape on unmarked location before placing buick or regal door nameplate at 30 mm (1.188 in) below molding top and 80 mm (3.156 in) from door front edge. Position the century limited nameplate directly into its designated spot in the door panel opening. Preheat the mounting area to 80-105°F (80-105°F) using the J 25070 heat gun (J 25070) but keep the nameplate surface at 85-90°F temperature during application. Position the label following position marks before stripping off the liner backing. Apply steady pressure to even bond the nameplate with the designated surface. Take off the protective tape from the installed area.

OEM Buick Regal Emblem

Badge

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

48 Emblems found

View related parts
Buick Regal Nameplate, Rear Part Number: 22744914
$5.70 MSRP: $8.49
You Save: $2.79 (33%)
Product Specifications
- Other Name: Emblem, Rear Compartment Lid, Rear End Panel And Tailgate; Emblem,Rear End Panel And Tailgate; Plate,Rear End Panel And Tailgate
- Position: Rear
- Replaces: 22755698
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2011 Buick Regal | CXL | 4 Cyl 2.0 L FLEX
View related parts
Buick Regal Emblem Kit, Front Part Number: 22792562
Product Specifications
- Other Name: Emblem, Radiator Grille And Front End Ornamentation
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2012-2013 Buick Regal | GS | 4 Cyl 2.0 L FLEX
View related parts
Buick Regal Center Cap Part Number: 25534930
Product Specifications
- Other Name: Emblem, Wheel Cover Appearance; Wheel Center Cap; Hub Cap; Emblem; Insert; Insert, Wheel Cover Appearance
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1991-1994 Buick Regal | Custom, Gran Sport, Limited | 6 Cyl 3.1 L GAS, 6 Cyl 3.8 L GAS
View related parts
Buick Regal Emblem, Rear Part Number: 10134601
Product Specifications
- Other Name: Emblem, Rear End Panel And Tailgate; Emblem,Rear End Panel And Tailgate
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1989-1996 Buick Regal | Gran Sport | 6 Cyl 3.1 L GAS, 6 Cyl 3.8 L GAS
View related parts
Buick Regal Emblem, Front Part Number: 10273068
Product Specifications
- Other Name: Emblem, Radiator Grille And Front End Ornamentation
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2004 Buick Regal | 25th Anniversary Edition, GS, GSE, LS, LSE | 6 Cyl 3.8 L GAS
View related parts
Buick Regal Nameplate, Front Part Number: 25522816
Product Specifications
- Other Name: Plate, Radiator Grille And Front End Ornamentation
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1985-1986 Buick Regal | Base, Grand National, Limited, T-Type | 6 Cyl 3.8 L GAS, 6 Cyl 4.3 L DIESEL, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL
View related parts
Buick Regal Center Cap Part Number: 10097503
Product Specifications
- Other Name: Medallion, Wheel Cover Appearance; Wheel Center Cap; Hub Cap; Emblem, Wheel Cover Appearance
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1988-1991 Buick Regal | Custom, Gran Sport, Limited | 6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS, 6 Cyl 3.8 L GAS
View related parts
Buick Regal Nameplate Part Number: 20454507
Product Specifications
- Other Name: Plate, Rear Quarter Name; Plate, Rear Quarter Panel
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984 Buick Regal | Limited | 6 Cyl 4.1 L GAS, 6 Cyl 4.3 L DIESEL
View related parts
Buick Regal Ornament Part Number: 25500235
Product Specifications
- Other Name: Ornament Assembly, Front End Panel; Ornament, Radiator Grille And Front End Ornamentation
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984 Buick Regal | Base, Limited | 6 Cyl 4.1 L GAS, 6 Cyl 4.3 L DIESEL
View related parts
Buick Regal Emblem, Front Part Number: 25513264
Product Specifications
- Other Name: Emblem, Front Fender; Emblem, Front Fender Name
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1987 Buick Regal | Base, GNX, Grand National, Limited, T-Type | 6 Cyl 3.8 L GAS, 6 Cyl 4.1 L GAS, 6 Cyl 4.3 L DIESEL, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL
View related parts
Buick Regal Emblem Part Number: 25510039
Product Specifications
- Other Name: Emblem, Steering Wheel; Emblem, Horn Button
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1989-1993 Buick Regal | Custom, Gran Sport, Limited | 6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS, 6 Cyl 3.8 L GAS
View related parts
Buick Regal Nameplate, Front Part Number: 10156875
Product Specifications
- Other Name: Plate, Radiator Grille And Front End Ornamentation
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992 Buick Regal | Gran Sport | 6 Cyl 3.8 L GAS
View related parts
Buick Regal Nameplate, Front Part Number: 10133606
Product Specifications
- Other Name: Plate, Radiator Grille And Front End Ornamentation
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1989-1994 Buick Regal | Gran Sport | 6 Cyl 3.1 L GAS, 6 Cyl 3.8 L GAS
View related parts
Buick Regal Emblem, Front Part Number: 10141719
Product Specifications
- Other Name: Emblem, Front Fender Name
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1989 Buick Regal | Custom, Gran Sport, Limited | 6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS
View related parts
Buick Regal Emblem, Front Part Number: 20624020
Product Specifications
- Other Name: Emblem, Front Fender Name
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1988 Buick Regal | Custom, Limited | 6 Cyl 2.8 L GAS
View related parts
Buick Regal Emblem, Rear Part Number: 10303379
Product Specifications
- Other Name: Emblem, Rear Compartment Lid, Rear End Panel And Tailgate; Plate,Rear End Panel And Tailgate
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2004 Buick Regal | GS, LS | 6 Cyl 3.8 L GAS
View related parts
Buick Regal Nameplate, Front Part Number: 10212236
Product Specifications
- Other Name: Emblem, Radiator Grille And Front End Ornamentation
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1993-1996 Buick Regal | Custom, Gran Sport, Limited, Olympic Gold Edition | 6 Cyl 3.1 L GAS, 6 Cyl 3.8 L GAS
View related parts
Buick Regal Emblem Part Number: 12399606
Product Specifications
- Other Name: Emblem Kit, Radiator Grille; Emblem, Radiator Grille And Front End Ornamentation
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1991-1992 Buick Regal | Custom, Gran Sport, Limited | 6 Cyl 3.1 L GAS, 6 Cyl 3.8 L GAS
View related parts
Buick Regal Nameplate, Front Part Number: 10235389
Product Specifications
- Other Name: Plate, Front Side Door; Plate Assembly, Front Side Door
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-1996 Buick Regal | Custom, Gran Sport, Limited, Olympic Gold Edition | 6 Cyl 3.1 L GAS, 6 Cyl 3.8 L GAS
View related parts
Buick Regal Ornament, Front Part Number: 14101730
Product Specifications
- Other Name: Ornament, Radiator Grille And Front End Ornamentation
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1988 Buick Regal | Custom, Limited | 6 Cyl 2.8 L GAS

| Page 1 of 3 |Next >

1-20 of 48 Results

Buick Regal Emblem

Want to cut long-term maintenance and repair costs? Choose OEM Emblem. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Buick Regal parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Buick Regal Emblem includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

Buick Regal Emblem Parts and Q&A

Emblem, Rear
25602037
Q: How to Replace or Repair a Rear Fascia Emblem on Buick Regal?
A:
Before working on a Buick rear fascia emblem/nameplate you need to apply tape to prevent damage while setting up installation marks. Use a Heat Gun model J 25070 to warm the emblem/nameplate by moving the gun in circles for 30 seconds. You should use a plastic tool to lift off the emblem/nameplate when removing it from the panel surface to avoid paint damage. Clean neither the panel surface nor the molding tape with adhesive remover and a pad after removing the damaged tape from either part. Replace the tape when your work continues. Press the adhesive foam tape onto the back of the emblem/nameplate before fitting it to the proper spot. You need the 3M(TM) Scotch Brite molding adhesive remover disk P/N 07501 to remove adhesive from body panels while using a lint-free cloth soaked with VMP naphtha or a 50/50 isopropyl alcohol mixture for plastic panels. Thoroughly wipe the installation region with a lint-free cloth and VMP naphtha or alcohol-water solution before drying it properly to prepare the space free from dust. Mark tape placement spots when no original locations are given. Apply proper temperatures of 27-41°C (80-105°F) to the mounting surface and keep the emblem/nameplate at 29-32°C (85-90°F). Put the emblem/nameplate on the mounting surface at the marked spots and push it tightly by giving it equal pressure all over. After placing the emblem/nameplate on the right spot, peel off the protective tape from the surface.
Emblem, Front
10273068
Q: How to replace or repair a front emblem on Buick Regal?
A:
Before putting in the new nameplate tape off both the mount surface and the replacement itself to help align the parts during assembly. Apply the J 25070 heat gun (J 25070) in circular motions for 30 seconds to heat the nameplate. Use a plastic flat blade to gently take off the nameplate from its surface. Use 3M scotch brite molding adhesive remover disk P/N 07502 or equivalent to clean adhesive from body panels while using vmp naphtha or isopropyl alcohol mixture with water on plastic panels. Use clean dry space for installation and apply tape on unmarked location before placing buick or regal door nameplate at 30 mm (1.188 in) below molding top and 80 mm (3.156 in) from door front edge. Position the century limited nameplate directly into its designated spot in the door panel opening. Preheat the mounting area to 80-105°F (80-105°F) using the J 25070 heat gun (J 25070) but keep the nameplate surface at 85-90°F temperature during application. Position the label following position marks before stripping off the liner backing. Apply steady pressure to even bond the nameplate with the designated surface. Take off the protective tape from the installed area.