How to replace the emblem/nameplate on the front fender on 2003 Buick LeSabre?

Begin with tape protection on the front fender when replacing the emblem/nameplate. Use the Heat Gun Model J 25070 to warm up the emblem/nameplate in continuous circular motion for 30 seconds. Gently pull out the panel surface emblem/nameplate with a plastic flat tool. Clean both body and plastic surfaces properly before putting on the emblem/nameplate. Use a 3M(TM) Scotch Brite molding adhesive remover disk (3M(TM) P/N 07502) or an alternative product for metal surfaces while using a lint-free cloth with VMP naphtha or isopropyl alcohol and water mixture to clean plastic panels. Clear the drying space before putting the emblem on the fender and align it correctly at the hole position. Heat the mounting spot to 80-105°F or 27-41°C using the Heat Gun (J 25070) when heating becomes essential. Apply the emblem/nameplate when its temperature sits at 29 to 32 degrees Celsius (85 to 90 degrees Fahrenheit) without handling the backing tape. Use the fender as the target mounting site and press the designed emblem/nameplate surface onto it to make a uniform adhesion. Finally, remove the protective tape.

OEM 2003 Buick LeSabre Emblem

Badge

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Emblems found

View related parts
2003 Buick LeSabre Emblem, Front Part Number: 25713251
$47.87 MSRP: $57.91
You Save: $10.04 (18%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Emblem, Front Fender Name
- Position: Front
- Replaces: 25699941
- Item Weight: 0.30 Pounds
- Item Dimensions: 2.7 x 2.7 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 25713251
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Buick LeSabre Submodels:
- Custom, Limited | 6 Cyl 3.8 L GAS
View related parts
2003 Buick LeSabre Emblem, Front Part Number: 25737019
$6.75 MSRP: $9.10
You Save: $2.35 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Emblem, Front Fender Name
- Position: Front
- Item Weight: 0.40 Pounds
- Item Dimensions: 3.2 x 3.2 x 1.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 25737019
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Buick LeSabre Submodels:
- Custom, Limited | 6 Cyl 3.8 L GAS
View related parts
2003 Buick LeSabre Nameplate Part Number: 25667561
Product Specifications
- Other Name: Emblem, Instrument Panel
- Item Weight: 0.40 Pounds
- Item Dimensions: 4.0 x 0.5 x 0.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25667561
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Buick LeSabre Submodels:
- Limited | 6 Cyl 3.8 L GAS
View related parts
2003 Buick LeSabre Nameplate Part Number: 25667560
Product Specifications
- Other Name: Emblem, Instrument Panel
- Item Weight: 0.30 Pounds
- Item Dimensions: 4.1 x 0.6 x 0.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25667560
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Buick LeSabre Submodels:
- Custom | 6 Cyl 3.8 L GAS

2003 Buick LeSabre Emblem

With a comprehensive array of OEM 2003 Buick LeSabre Emblem, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2003 Buick LeSabre Emblem are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2003 Buick LeSabre Emblem Parts and Q&A

Q: How to replace the emblem/nameplate on the front fender on 2003 Buick LeSabre?
A: Begin with tape protection on the front fender when replacing the emblem/nameplate. Use the Heat Gun Model J 25070 to warm up the emblem/nameplate in continuous circular motion for 30 seconds. Gently pull out the panel surface emblem/nameplate with a plastic flat tool. Clean both body and plastic surfaces properly before putting on the emblem/nameplate. Use a 3M(TM) Scotch Brite molding adhesive remover disk (3M(TM) P/N 07502) or an alternative product for metal surfaces while using a lint-free cloth with VMP naphtha or isopropyl alcohol and water mixture to clean plastic panels. Clear the drying space before putting the emblem on the fender and align it correctly at the hole position. Heat the mounting spot to 80-105°F or 27-41°C using the Heat Gun (J 25070) when heating becomes essential. Apply the emblem/nameplate when its temperature sits at 29 to 32 degrees Celsius (85 to 90 degrees Fahrenheit) without handling the backing tape. Use the fender as the target mounting site and press the designed emblem/nameplate surface onto it to make a uniform adhesion. Finally, remove the protective tape.