How to service the Throttle Position Sensor on 2002 GMC Savana 3500?

In order to service Throttle Position Sensor, remove the negative battery cable and take the engine cover off. Unhook the harness on the TP sensor and take the fasteners off. Install the new TP sensor to the throttle shaft, screw in the fasteners, reconnect the harness, install the engine cover again and reconnect the battery cable.

OEM 2002 GMC Savana 3500 Throttle Position Sensor

TPS Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Throttle Position Sensor found

View related parts
2002 GMC Savana 3500 Throttle Position Sensor Part Number: 17123852
Product Specifications
- Other Name: Sensor, Multi Portion Fuel Injection Throttle Position
- Item Weight: 0.40 Pounds
- Item Dimensions: 2.9 x 2.8 x 1.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 17123852
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 GMC Savana 3500 Submodels:
- Base, SLE, SLT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS, 8 Cyl 8.1 L GAS

2002 GMC Savana 3500 Throttle Position Sensor

With a comprehensive array of OEM 2002 GMC Savana 3500 Throttle Position Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2002 GMC Savana 3500 Throttle Position Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2002 GMC Savana 3500 Throttle Position Sensor Parts and Q&A

Q: How to service the Throttle Position Sensor on 2002 GMC Savana 3500?
A: In order to service Throttle Position Sensor, remove the negative battery cable and take the engine cover off. Unhook the harness on the TP sensor and take the fasteners off. Install the new TP sensor to the throttle shaft, screw in the fasteners, reconnect the harness, install the engine cover again and reconnect the battery cable.