How to replace the fuel filler hose on 2002 Chevrolet S10?

After disconnecting the negative terminal the first step is to remove the fuel filler pipe. The Fuel Tank draining procedure (Pick Up) or Fuel Tank draining procedure (2-Door Utility) must be followed to drain fuel down to the lowest point of the fuel fill hose. First wipe the vent hose connection of the Fuel Tank followed by disconnecting the vent hose with its clamp. Toward the beginning of the installation wipe the Fuel Filler Hose connection at the Fuel Tank before unclasping the Fuel Filler Hose. Protection from contamination will be achieved by using tank caps on each Fuel Tank opening. The fuel fill and vent hoses must be attached to the Fuel Tank by removing its caps while tightening hose clamps correctly: both the vent hose clamp to 1.7 n.m (15 lb in) and the fuel fill hose clamp to 2.5 n.m (22 lb in). Reconnect the fuel filler pipe while filling the system with fuel then put on the fuel filler cap. Finish the task by inspecting for any leakage after reconnecting the negative Battery Cable.

OEM 2002 Chevrolet S10 Fuel Filler Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Fuel Filler Hoses found

View related parts
2002 Chevrolet S10 Hose Part Number: 15748509
Product Specifications
- Other Name: Hose, Fuel Tank Filler; Fuel Hose
- Item Weight: 1.80 Pounds
- Item Dimensions: 4.2 x 2.5 x 2.5 inches
- Condition: New
- SKU: 15748509
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2002 Chevrolet S10 Submodels:
- Base, LS, Xtreme, ZR2, ZR5 | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
View related parts
2002 Chevrolet S10 Filler Neck Part Number: 15761471
Product Specifications
- Other Name: Pipe Assembly-Fuel Tank Filler; Fuel Tank Filler Neck; Fuel Filler Hose; Pipe, Fuel Tank Filler
- Item Weight: 2.60 Pounds
- Item Dimensions: 19.9 x 17.1 x 13.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15761471
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet S10 Submodels:
- Base, ZR5 | 4 Cyl 2.2 L FLEX, 6 Cyl 4.3 L GAS
View related parts
2002 Chevrolet S10 Filler Neck Part Number: 15059232
Product Specifications
- Other Name: Pipe Assembly-Fuel Tank Filler *Marked Print; Fuel Tank Filler Neck; Fuel Filler Hose; Pipe, Fuel Tank Filler
- Item Weight: 1.10 Pounds
- Item Dimensions: 16.2 x 14.4 x 6.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15059232
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet S10 Submodels:
- Base, LS, Xtreme, ZR2 | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS

2002 Chevrolet S10 Fuel Filler Hose

With a comprehensive array of OEM 2002 Chevrolet S10 Fuel Filler Hose, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2002 Chevrolet S10 Fuel Filler Hose are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2002 Chevrolet S10 Fuel Filler Hose Parts and Q&A

Q: How to replace the fuel filler hose on 2002 Chevrolet S10?
A: After disconnecting the negative terminal the first step is to remove the fuel filler pipe. The Fuel Tank draining procedure (Pick Up) or Fuel Tank draining procedure (2-Door Utility) must be followed to drain fuel down to the lowest point of the fuel fill hose. First wipe the vent hose connection of the Fuel Tank followed by disconnecting the vent hose with its clamp. Toward the beginning of the installation wipe the Fuel Filler Hose connection at the Fuel Tank before unclasping the Fuel Filler Hose. Protection from contamination will be achieved by using tank caps on each Fuel Tank opening. The fuel fill and vent hoses must be attached to the Fuel Tank by removing its caps while tightening hose clamps correctly: both the vent hose clamp to 1.7 n.m (15 lb in) and the fuel fill hose clamp to 2.5 n.m (22 lb in). Reconnect the fuel filler pipe while filling the system with fuel then put on the fuel filler cap. Finish the task by inspecting for any leakage after reconnecting the negative Battery Cable.