How to Replace Canister Purge Valves on 2002 Chevrolet S10?

The first step to replace the evap Canister Purge Valves involves removing the evaporative emission (EVAP) purge pipe together with the purge solenoid electrical connector. First detach all mounting nuts from the purge solenoid followed by the engine wire bracket from the stud before removing the purge solenoid from the Intake Manifold. You should reinstall the purge solenoid onto the Intake Manifold while following the instructions of service precautions related to fastener notice before placing the engine wiring harness bracket onto the mounting stud. Fasten the purge solenoid with mounting nuts while tightening them until they reach 12 n.m (106 lb in), then restore connections of the purge solenoid's electrical connector and evap purge pipe.

OEM 2002 Chevrolet S10 Canister Purge Valves

Fuel Tank Evaporator Purge Control Valve

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Canister Purge Valves found

View related parts
2002 Chevrolet S10 Purge Valve Part Number: 1997277
$43.24 MSRP: $77.22
You Save: $33.98 (44%)
Product Specifications
- Other Name: Valve, Evaporator Emission Canister Purge Solenoid; Vapor Canister Purge and Vent Solenoid.; Purge Solenoid; Purge Control Valve; Valve; Valve, Fuel Tank Evaporator/Purge Control
- Item Weight: 0.60 Pounds
- Item Dimensions: 4.6 x 2.9 x 2.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1997277
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet S10 Submodels:
- Base, LS, SS, Xtreme, ZR2, ZR5 | 6 Cyl 4.3 L GAS
View related parts
2002 Chevrolet S10 Purge Solenoid Part Number: 1997286
Product Specifications
- Other Name: Valve, Evaporator Emission Canister Purge Solenoid (W/Bracket); Vapor Canister Purge & Vent Solenoid.; Valve, Fuel Tank Evaporator/Purge Control
- Item Weight: 0.60 Pounds
- Item Dimensions: 4.2 x 3.1 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1997286
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet S10 Submodels:
- Base, LS, Xtreme | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS

2002 Chevrolet S10 Canister Purge Valves

With a comprehensive array of OEM 2002 Chevrolet S10 Canister Purge Valves, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2002 Chevrolet S10 Canister Purge Valves are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2002 Chevrolet S10 Canister Purge Valves Parts and Q&A

Q: How to Replace Canister Purge Valves on 2002 Chevrolet S10?
A: The first step to replace the evap Canister Purge Valves involves removing the evaporative emission (EVAP) purge pipe together with the purge solenoid electrical connector. First detach all mounting nuts from the purge solenoid followed by the engine wire bracket from the stud before removing the purge solenoid from the Intake Manifold. You should reinstall the purge solenoid onto the Intake Manifold while following the instructions of service precautions related to fastener notice before placing the engine wiring harness bracket onto the mounting stud. Fasten the purge solenoid with mounting nuts while tightening them until they reach 12 n.m (106 lb in), then restore connections of the purge solenoid's electrical connector and evap purge pipe.