How to replace the steering wheel on 2002 Chevrolet Monte Carlo?

Disengage the sir system and set the ignition position to off in order to replace the Steering Wheel. Deinstall the inflatable restraint Steering Wheel module and employ a scribe in order to mark the alignment on the Steering Wheel hub and align it with the slash mark on the Steering Shaft. Relax the nut on the Steering Wheel, and place it against the end of the Steering Shaft. Mount the j 1859-a with j 42578 legs to the Steering Wheel and assemble them together to use to pull off the Steering Wheel from the Steering Shaft. Disconnect the sir connector from the Steering Wheel and remove the Steering Wheel out of the vehicle after removal. For installation, mount the new Steering Wheel to the Steering Column, feed the sir connector through it and align the scribe mark with the slash mark on the Steering Shaft before putting the Steering Wheel. Install Steering Shaft nut and tighten to 45 nm (33 ft. Lbs.); install inflatable restraint Steering Wheel module and enable sir system. Lastly, test the operation of the Horn, Steering Wheel, and the Steering Wheel controls.

OEM 2002 Chevrolet Monte Carlo Steering Wheel

Navigation Steering Wheel

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Steering Wheels found

View related parts
2002 Chevrolet Monte Carlo Steering Wheel Part Number: 10291236
Product Specifications
- Item Weight: 3.90 Pounds
- Item Dimensions: 15.5 x 16.1 x 5.3 inches
- Condition: New
- SKU: 10291236
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2002 Chevrolet Monte Carlo Submodels:
- LS, LS Competition, LS Sport, LT, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
2002 Chevrolet Monte Carlo Steering Wheel Part Number: 10355134
Product Specifications
- Other Name: Wheel, Steering
- Item Weight: 4.30 Pounds
- Item Dimensions: 17.7 x 16.8 x 6.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10355134
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet Monte Carlo Submodels:
- LS, LS Competition, LS Sport, LT, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
2002 Chevrolet Monte Carlo Steering Wheel Part Number: 10355136
Product Specifications
- Other Name: Wheel, Steering
- Item Weight: 4.10 Pounds
- Item Dimensions: 17.9 x 17.0 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10355136
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet Monte Carlo Submodels:
- LS, LS Competition, LS Sport, LT, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS

2002 Chevrolet Monte Carlo Steering Wheel

With a comprehensive array of OEM 2002 Chevrolet Monte Carlo Steering Wheel, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2002 Chevrolet Monte Carlo Steering Wheel are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2002 Chevrolet Monte Carlo Steering Wheel Parts and Q&A

Q: How to replace the steering wheel on 2002 Chevrolet Monte Carlo?
A: Disengage the sir system and set the ignition position to off in order to replace the Steering Wheel. Deinstall the inflatable restraint Steering Wheel module and employ a scribe in order to mark the alignment on the Steering Wheel hub and align it with the slash mark on the Steering Shaft. Relax the nut on the Steering Wheel, and place it against the end of the Steering Shaft. Mount the j 1859-a with j 42578 legs to the Steering Wheel and assemble them together to use to pull off the Steering Wheel from the Steering Shaft. Disconnect the sir connector from the Steering Wheel and remove the Steering Wheel out of the vehicle after removal. For installation, mount the new Steering Wheel to the Steering Column, feed the sir connector through it and align the scribe mark with the slash mark on the Steering Shaft before putting the Steering Wheel. Install Steering Shaft nut and tighten to 45 nm (33 ft. Lbs.); install inflatable restraint Steering Wheel module and enable sir system. Lastly, test the operation of the Horn, Steering Wheel, and the Steering Wheel controls.