How to service and repair the body emblem, specifically for the molding/nameplate replacement on the Z28 Rear End Finish Panel on 2002 Chevrolet Camaro?

The body emblem's service and repair demands the J 25070 Heat Gun for molding/nameplate substitution of the Z28 Rear End Finish Panel. Use masking tape to label the emblem/nameplate position at first. Use the J 25070 heat gun to heat the emblem/nameplate for 30 seconds while keeping a circular pattern. The rear bumper fascia's emblem/nameplate removal requires a plastic flat-bladed tool assisted by gentle plastic, flat-bladed tool application. Use soapy water to clean the fascia before drying it thoroughly while you remove all adhesive residue with oil-free naptha or alcohol. During setup keep all contact with the emblem/nameplate adhesive surface to a minimum. First remove the backing from the emblem/nameplate then position it at two measurement points: 164.0 mm (6.46 in) from the tail lamp lens edge and 16.0 mm (0.63 in) from the rear bumper fascia bottom edge. Press the emblem/nameplate firmly against the tape guideline when it is aligned correctly.

OEM 2002 Chevrolet Camaro Emblem

Badge

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Emblems found

View related parts
2002 Chevrolet Camaro Nameplate, Front Part Number: 10139552
$44.05 MSRP: $65.56
You Save: $21.51 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Emblem, Front Fender Name
- Position: Front
- Item Weight: 0.40 Pounds
- Item Dimensions: 7.7 x 2.0 x 0.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 10139552
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet Camaro Submodels:
- Indianapolis 500 Pace Car, Z28, Z28 SS | 8 Cyl 5.7 L GAS
View related parts
2002 Chevrolet Camaro Emblem, Front Part Number: 10193494
Product Specifications
- Other Name: Emblem Assembly-Front Bumper Fascia; Emblem, Bumper/Fascia
- Position: Front
- Item Weight: 0.30 Pounds
- Item Dimensions: 3.5 x 2.0 x 0.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10193494
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet Camaro Submodels:
- Base, Indianapolis 500 Pace Car, RS, Z28, Z28 SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.7 L GAS
View related parts
2002 Chevrolet Camaro Nameplate, Rear Part Number: 10154591
Product Specifications
- Other Name: Emblem, Rear End Panel And Tailgate; Emblem,Rear End Panel And Tailgate
- Position: Rear
- Item Weight: 0.40 Pounds
- Item Dimensions: 14.0 x 2.6 x 0.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10154591
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet Camaro Submodels:
- Indianapolis 500 Pace Car, Z28, Z28 SS | 8 Cyl 5.7 L GAS
View related parts
2002 Chevrolet Camaro Nameplate Part Number: 10308473
Product Specifications
- Position: Rear
- Item Weight: 0.40 Pounds
- Item Dimensions: 7.4 x 5.2 x 5.1 inches
- Condition: New
- SKU: 10308473
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2002 Chevrolet Camaro Submodels:
- Base, Z28, Z28 SS | 6 Cyl 3.8 L GAS, 8 Cyl 5.7 L GAS
View related parts
2002 Chevrolet Camaro Nameplate, Red, Rear Part Number: 12369965
Product Specifications
- Other Name: Emblem, Rear End Panel And Tailgate; Emblem,Rear End Panel And Tailgate
- Position: Rear
- Item Weight: 0.30 Pounds
- Item Dimensions: 5.7 x 2.6 x 0.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12369965
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet Camaro Submodels:
- Base, Z28, Z28 SS | 6 Cyl 3.8 L GAS, 8 Cyl 5.7 L GAS
View related parts
2002 Chevrolet Camaro Nameplate, Silver, Rear Part Number: 12369966
Product Specifications
- Other Name: Emblem, Rear End Panel And Tailgate; Emblem,Rear End Panel And Tailgate
- Position: Rear
- Item Weight: 0.40 Pounds
- Item Dimensions: 5.9 x 2.6 x 0.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12369966
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet Camaro Submodels:
- Base, Z28, Z28 SS | 6 Cyl 3.8 L GAS, 8 Cyl 5.7 L GAS
View related parts
2002 Chevrolet Camaro Nameplate, Front Part Number: 10307879
Product Specifications
- Other Name: Emblem, Front Fender Name
- Position: Front
- Item Weight: 0.40 Pounds
- Item Dimensions: 3.5 x 6.3 x 0.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 10307879
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet Camaro Submodels:
- Base, Z28, Z28 SS | 6 Cyl 3.8 L GAS, 8 Cyl 5.7 L GAS

2002 Chevrolet Camaro Emblem

With a comprehensive array of OEM 2002 Chevrolet Camaro Emblem, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2002 Chevrolet Camaro Emblem are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2002 Chevrolet Camaro Emblem Parts and Q&A

Q: How to service and repair the body emblem, specifically for the molding/nameplate replacement on the Z28 Rear End Finish Panel on 2002 Chevrolet Camaro?
A: The body emblem's service and repair demands the J 25070 Heat Gun for molding/nameplate substitution of the Z28 Rear End Finish Panel. Use masking tape to label the emblem/nameplate position at first. Use the J 25070 heat gun to heat the emblem/nameplate for 30 seconds while keeping a circular pattern. The rear bumper fascia's emblem/nameplate removal requires a plastic flat-bladed tool assisted by gentle plastic, flat-bladed tool application. Use soapy water to clean the fascia before drying it thoroughly while you remove all adhesive residue with oil-free naptha or alcohol. During setup keep all contact with the emblem/nameplate adhesive surface to a minimum. First remove the backing from the emblem/nameplate then position it at two measurement points: 164.0 mm (6.46 in) from the tail lamp lens edge and 16.0 mm (0.63 in) from the rear bumper fascia bottom edge. Press the emblem/nameplate firmly against the tape guideline when it is aligned correctly.