How to replace the front bumper fascia emblem on Chevrolet Camaro?

To replace the front bumper fascia emblem, first note the position of the emblem/nameplate with a strip of masking tape. Use the Heat Gun (J 25070) and apply heat around the emblem/nameplate in circular motion for approximately 30 seconds. Gently pry off the emblem/nameplate from the fascia without damaging, using a plastic flat-bladed extraction tool. And must keep and clean the fascia and wipe off with soapy water and dry it off and also rid it of any adhesive too by oil-free naptha or alcohol. When going to install the new emblem/nameplate, do not touch the adhesive backing, remove the backing of the emblem/nameplate, align the emblem/nameplate working along the tape guideline, press hard so the emblem/nameplate adheres to the place.

How to Service and Repair a Body Emblem on the Z28 Rear End Finish Panel on Chevrolet Camaro?

Before working on the body emblem mark its position with a strip of masking tape. Position the emblem/nameplate with a tape strip. Heat the emblem using J 25070 Heat Gun (J 25070) in rotative movements for half a minute. Use a plastic flat tool to safely pull off the emblem/nameplate from the rear bumper fascia. Wash the rear fascia with soap then dry it fully before eliminating tack sticks with neat oil-free solvent. Keep the adhesive side of the emblem/nameplate free from contact during application. Mark 164.0 mm (6.46 in) from tail lamp outer edge to emblem edge and 16.0 mm (0.63 in) from bottom bumper edge to bottom emblem edge. After removing the emblem/nozzle backing apply it to these locations. Seal the emblem/nameplate by connecting it to the taped guideline.

OEM Chevrolet Camaro Emblem

Badge

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

55 Emblems found

View related parts
Chevrolet Camaro Nameplate, Front Part Number: 10139552
$44.05 MSRP: $65.56
You Save: $21.51 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Emblem, Front Fender Name
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1993-2002 Chevrolet Camaro | Indianapolis 500 Pace Car, Z28, Z28 SS | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Camaro Nameplate Part Number: 22830718
$59.28 MSRP: $88.23
You Save: $28.95 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Emblem, Hood Panel Ornamentation
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2012-2015 Chevrolet Camaro | ZL1 | 8 Cyl 6.2 L GAS
View related parts
Chevrolet Camaro Emblem Part Number: 84046847
$67.96 MSRP: $101.15
You Save: $33.19 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Emblem, Bumper/Fascia; Nameplate; Plate,Rear End Panel And Tailgate; Emblem, Hood Panel Ornamentation
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2017-2024 Chevrolet Camaro | ZL1 | 8 Cyl 6.2 L GAS
View related parts
Chevrolet Camaro Nameplate, Rear Part Number: 22830719
$48.46 MSRP: $72.13
You Save: $23.67 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Plate, End Gate And Rear Door Decoration; Plate,Rear End Panel And Tailgate
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2012-2015 Chevrolet Camaro | ZL1 | 8 Cyl 6.2 L GAS
View related parts
Chevrolet Camaro Emblem, Front Part Number: 23171889
$81.63 MSRP: $121.49
You Save: $39.86 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Emblem, Front Fender Name
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2015 Chevrolet Camaro | LS, LT, SS, Z/28, ZL1 | 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
View related parts
Chevrolet Camaro Emblem Part Number: 84689784
$11.42 MSRP: $17.00
You Save: $5.58 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Emblem, Front Side Door; Decal; Nameplate; Emblem, Cab, Load Carrier, Rear End, Door, Quarter Panel, Fender, Rocker Panel, Side Step.
- Replaces: 15223483, 15223484
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010 Chevrolet Camaro | LS, LT, SS | 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS
View related parts
Chevrolet Camaro Nameplate Part Number: 92246939
$45.13 MSRP: $64.58
You Save: $19.45 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Emblem, Front Fender Name
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2012 Chevrolet Camaro | LS, LT, SS, ZL1 | 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS
View related parts
Chevrolet Camaro Emblem Kit, Black Part Number: 23358104
$105.00 MSRP: $125.00
You Save: $20.00 (16%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Emblem Package-Body *Black) (Install
- Replaced by: 84219485
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016-2024 Chevrolet Camaro | LS, LT, LT1, SS | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS
View related parts
Chevrolet Camaro Emblem Kit, Gold Part Number: 23380121
$229.97 MSRP: $275.00
You Save: $45.03 (17%)
Product Specifications
- Other Name: Emblem Package-Body *Gold) (Install; Emblem Package, Radiator Grille And Front End Ornamentation
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016-2018 Chevrolet Camaro | LS, LT, SS | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS
View related parts
Chevrolet Camaro Nameplate, Front Part Number: 22908498
Product Specifications
- Other Name: Emblem Assembly-Front Grille; Emblem, Radiator Grille And Front End Ornamentation
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2015 Chevrolet Camaro | Z/28 | 8 Cyl 7.0 L GAS
View related parts
Chevrolet Camaro Nameplate, White Part Number: 92225494
Product Specifications
- Other Name: Emblem, Radiator Grille And Front End Ornamentation
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2015 Chevrolet Camaro | SS | 8 Cyl 6.2 L GAS
View related parts
Chevrolet Camaro Nameplate, Rear Part Number: 22908036
$31.96 MSRP: $47.58
You Save: $15.62 (33%)
Product Specifications
- Other Name: Emblem, End Gate And Rear Door Decoration; Plate,Rear End Panel And Tailgate
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2015 Chevrolet Camaro | Z/28 | 8 Cyl 7.0 L GAS
View related parts
Chevrolet Camaro Nameplate, Rear Part Number: 10154591
Product Specifications
- Other Name: Emblem, Rear End Panel And Tailgate; Emblem,Rear End Panel And Tailgate
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1993-2002 Chevrolet Camaro | Indianapolis 500 Pace Car, Z28, Z28 SS | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Camaro Emblem, Front Part Number: 10193494
Product Specifications
- Other Name: Emblem Assembly-Front Bumper Fascia; Emblem, Bumper/Fascia
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1993-2002 Chevrolet Camaro | Base, Indianapolis 500 Pace Car, RS, Z28, Z28 SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Camaro Emblem Kit, Black Part Number: 23393028
$271.78 MSRP: $325.00
You Save: $53.22 (17%)
Product Specifications
- Other Name: Emblem Package-Body *Black) (Install; Emblem Package, Radiator Grille And Front End Ornamentation
- Position: Front and Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016-2018 Chevrolet Camaro | LS, LT, SS | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS
View related parts
Chevrolet Camaro Emblem Kit, Black Part Number: 84329529
$296.87 MSRP: $355.00
You Save: $58.13 (17%)
Product Specifications
- Other Name: Emblem Package-Body *Black) (Install; Emblem Package, Radiator Grille And Front End Ornamentation
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2019-2020 Chevrolet Camaro | LS, LT, LT1, SS | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS
View related parts
Chevrolet Camaro Nameplate Part Number: 10143946
Product Specifications
- Other Name: Plate, Instrument Panel
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1991 Chevrolet Camaro | Z28 | 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Camaro Emblem Part Number: 10179120
Product Specifications
- Other Name: Emblem, Rocker Panel
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1991-1992 Chevrolet Camaro | RS, RS Heritage Edition | 6 Cyl 3.1 L GAS, 8 Cyl 5.0 L GAS
View related parts
Chevrolet Camaro Emblem, Front Part Number: 10290781
Product Specifications
- Other Name: Emblem, Radiator Grille And Front End Ornamentation
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997 Chevrolet Camaro | Base, RS, Z28 | 6 Cyl 3.8 L GAS, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Camaro Emblem, Front Part Number: 14083969
Product Specifications
- Other Name: Emblem, Radiator Grille And Front End Ornamentation
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1986 Chevrolet Camaro | Berlinetta | 6 Cyl 2.8 L GAS, 8 Cyl 5.0 L GAS

| Page 1 of 3 |Next >

1-20 of 55 Results

Chevrolet Camaro Emblem

Want to cut long-term maintenance and repair costs? Choose OEM Emblem. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Camaro parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Camaro Emblem includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

Chevrolet Camaro Emblem Parts and Q&A

Nameplate, Front
10139552
Q: How to replace the front bumper fascia emblem on Chevrolet Camaro?
A:
To replace the front bumper fascia emblem, first note the position of the emblem/nameplate with a strip of masking tape. Use the Heat Gun (J 25070) and apply heat around the emblem/nameplate in circular motion for approximately 30 seconds. Gently pry off the emblem/nameplate from the fascia without damaging, using a plastic flat-bladed extraction tool. And must keep and clean the fascia and wipe off with soapy water and dry it off and also rid it of any adhesive too by oil-free naptha or alcohol. When going to install the new emblem/nameplate, do not touch the adhesive backing, remove the backing of the emblem/nameplate, align the emblem/nameplate working along the tape guideline, press hard so the emblem/nameplate adheres to the place.
Nameplate, Rear
10154591
Q: How to Service and Repair a Body Emblem on the Z28 Rear End Finish Panel on Chevrolet Camaro?
A:
Before working on the body emblem mark its position with a strip of masking tape. Position the emblem/nameplate with a tape strip. Heat the emblem using J 25070 Heat Gun (J 25070) in rotative movements for half a minute. Use a plastic flat tool to safely pull off the emblem/nameplate from the rear bumper fascia. Wash the rear fascia with soap then dry it fully before eliminating tack sticks with neat oil-free solvent. Keep the adhesive side of the emblem/nameplate free from contact during application. Mark 164.0 mm (6.46 in) from tail lamp outer edge to emblem edge and 16.0 mm (0.63 in) from bottom bumper edge to bottom emblem edge. After removing the emblem/nozzle backing apply it to these locations. Seal the emblem/nameplate by connecting it to the taped guideline.