OEM 2001 Chevrolet Venture Air Suspension Compressor

2001 Chevrolet Venture Air Suspension Compressor Parts and Q&A

• Q: How to replace the Air Suspension Compressor on 2001 Chevrolet Venture?

  A: The first step to replace an Air Suspension Compressor requires vehicle elevation and support. Touch each clip on the Air Suspension Compressor filter's sides to release the attachment from the underbody rail. Afterward unscrew the bracket bolt followed by the compressor bracket nuts until the compressor hangs from the bracket hook. Detach the air line from the air dryer and also unhook the Air Suspension Compressor's electrical connection. First rotate the Air Suspension Compressor together with its bracket at a 90-degree angle to unhook it from the vehicle then take out the Air Suspension Compressor and the bracket. Start by removing the Air Suspension Compressor relay from the bracket then move to the Air Suspension Compressor dryer before finishing with the bolts to extract the Air Suspension Compressor from its bracket. Remove the Air Suspension Compressor filter hose connections at both points from the compressor body. Position the Air Suspension Compressor filter hose at its original points on the compressor before securely mounting the compressor onto the bracket with bolts/screws and tightening them to 4 nm (35 inch lbs.). Mount the Air Suspension Compressor shield alongside the relay and dryer. Secure the bracket onto the underbody rail while rotating its position through 90 degrees until the compressor can hang from the mounting hook. Secure the power cable together with the compressor airflow tubing to the dryer equipment. Begin by tightening bracket nuts to 10 nm (89 inch lbs.) before moving on to tighten the bracket bolt to 50 nm (37 ft. Lbs.). The Air Suspension Compressor filter requires installation to the underbody rail before lowering the vehicle.