Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2001 Chevrolet Corvette Crankshaft Seal

  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Crankshaft Seal found

  • 2001 Chevy Corvette Crankshaft Seal - 89060436
    2001 Chevy Corvette Crankshaft Seal - 89060436
    2001 Chevy Corvette Crankshaft Seal - 89060436
    2001 Chevy Corvette Crankshaft Seal Diagram - 89060436
    View related parts

    2001 Chevrolet Corvette Rear Main Seal Part Number: 89060436

    $24.24 MSRP: $39.93
    You Save: $15.69 (40%)
    Ships in 1-3 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Seal Kit, Crankshaft Rear Oil; Crankshaft Seal; Seal Kit, Engine Rear Main Bearing; Seal, Engine Rear Main Bearing
    • Position: Rear
    • Replaces: 12550574, 12585671, 89018162
    • Item Weight: 0.50 Pounds
    • Item Dimensions: 5.1 x 5.3 x 1.0 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 89060436
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    More Info
    Fits the following 2001 Chevrolet Corvette Submodels:
    • 427, 427 Limited Edition Z06, 50th Anniversary Edition, 50th Anniversary Edition Pace Car, Base, Grand Sport, Indianapolis 500 Pace Car, Stingray, Z06, Z06 Carbon, ZR1 | 8 Cyl 5.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS

2001 Chevrolet Corvette Crankshaft Seal

With a comprehensive array of OEM 2001 Chevrolet Corvette Crankshaft Seal, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2001 Chevrolet Corvette Crankshaft Seal are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2001 Chevrolet Corvette Crankshaft Seal Parts and Q&A

  • Q: How to replace the front crankshaft seal on 2001 Chevrolet Corvette?
    A: The crankshaft balancer needs removal before changing the crankshaft front oil seal. Slowly separate the crankshaft oil seal from its position in front of the front cover. You must avoid both lubrication of the crankshaft oil seal sealing surface and reusing the front crankshaft oil seal. Treatment of the new oil seal's outer edge and the front cover oil seal bore area requires clean engine oil. Install the oil seal onto the J4147S threaded rod (with nut, washer, guide, and oil seal) into the end of the crankshaft through the use of Crankshaft Front Oil Seal Installer (J 41478). Install the oil seal to the cover bore using the Crankshaft Front Oil Seal Installer (J 41478). Secure the hex portion of the installer tool using a wrench while simultaneously rotating the installer nut clockwise by holding it with an additional wrench until the entire seal sits inside the cover bore. Examine the complete installation of the oil seal within the front cover bore after tool removal while ensuring its even positioning. Finally, reinstall the crankshaft balancer.

Related 2001 Chevrolet Corvette Parts

Alternate Year Models

+
2000 Chevrolet Corvette Crankshaft Seal 2002 Chevrolet Corvette Crankshaft Seal