How to replace the left engine mount on 2000 GMC Jimmy?

The replacement of the left Engine Mount starts with raising the vehicle and removing underbody shields if installed. The technicians should remove both the through-bolt and the nut which secure the Engine Mount on the side of replacement. A jack should be positioned on the square tab at the engine block's rear side to elevate the engine block so the mount can be removed. Acceleration of the Starter enables access to the square tab positioned on the right-hand side of the mount. Begin by removing the bolts holding the Engine Mount frame bracket and bracket and finally the bolts attaching the Engine Mount to the engine. You should remove both the Engine Mount and its attached shield from the system. The installation requires assembling the Engine Mount with the shield and one bolt before safely attaching them to the engine. Tighten bolts on the Engine Mount to the engine blocks at 55 nm (41 ft. Lbs.). Next, install the Engine Mount frame bracket and fix its bolts at 45 nm (33 ft. Lbs.). Lower the engine subsequently use the jack to remove it while you install the through-bolts of the Engine Mount and tighten them to 74 nm (55 ft. Lbs.) before installing the nuts and securing them at 63 nm (46 ft. Lbs.). In case the Starter was removed, reinstallation is required before lowering the vehicle to the ground.

OEM 2000 GMC Jimmy Engine Mount

Engine Motor Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Engine Mounts found

View related parts
2000 GMC Jimmy Mount Bracket, Driver Side Part Number: 15725995
$19.08 MSRP: $29.13
You Save: $10.05 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket, Engine Mounting; Engine Mount Bracket; Motor Mount; Motor Mount Bracket
- Position: Driver Side
- Item Weight: 1.80 Pounds
- Item Dimensions: 5.3 x 3.5 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15725995
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 GMC Jimmy Submodels:
- Base, Diamond Edition, Envoy, SL, SLE, SLS, SLT | 6 Cyl 4.3 L GAS
View related parts
2000 GMC Jimmy Mount Bracket, Passenger Side Part Number: 15725994
$16.28 MSRP: $26.77
You Save: $10.49 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket, Engine Mounting; Engine Mount Bracket; Motor Mount; Motor Mount Bracket
- Position: Passenger Side
- Item Weight: 1.80 Pounds
- Item Dimensions: 5.2 x 4.9 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15725994
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 GMC Jimmy Submodels:
- Base, Diamond Edition, Envoy, SL, SLE, SLS, SLT | 6 Cyl 4.3 L GAS
View related parts
2000 GMC Jimmy Mount Bracket, Driver Side Part Number: 15725993
Product Specifications
- Other Name: Bracket, Engine Mounting; Engine Mount Bracket; Motor Mount; Motor Mount Bracket
- Position: Driver Side
- Item Weight: 1.80 Pounds
- Item Dimensions: 5.2 x 4.9 x 1.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15725993
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 GMC Jimmy Submodels:
- Base, Diamond Edition, Envoy, SL, SLE, SLS, SLT | 6 Cyl 4.3 L GAS
View related parts
2000 GMC Jimmy Motor Mount Part Number: 15138296
$83.06 MSRP: $130.10
You Save: $47.04 (37%)
Product Specifications
- Other Name: Mount; Engine Mount Bracket; Engine Mount; Front Mount; Mount, Engine Mount Dampening; Mount, Engine Mounting
- Replaces: 22173023
- Item Weight: 2.90 Pounds
- Item Dimensions: 4.8 x 4.8 x 3.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15138296
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 GMC Jimmy Submodels:
- Base, Diamond Edition, Envoy, SL, SLE, SLS, SLT | 6 Cyl 4.3 L GAS

2000 GMC Jimmy Engine Mount

With a comprehensive array of OEM 2000 GMC Jimmy Engine Mount, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2000 GMC Jimmy Engine Mount are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2000 GMC Jimmy Engine Mount Parts and Q&A

Q: How to replace the left engine mount on 2000 GMC Jimmy?
A: The replacement of the left Engine Mount starts with raising the vehicle and removing underbody shields if installed. The technicians should remove both the through-bolt and the nut which secure the Engine Mount on the side of replacement. A jack should be positioned on the square tab at the engine block's rear side to elevate the engine block so the mount can be removed. Acceleration of the Starter enables access to the square tab positioned on the right-hand side of the mount. Begin by removing the bolts holding the Engine Mount frame bracket and bracket and finally the bolts attaching the Engine Mount to the engine. You should remove both the Engine Mount and its attached shield from the system. The installation requires assembling the Engine Mount with the shield and one bolt before safely attaching them to the engine. Tighten bolts on the Engine Mount to the engine blocks at 55 nm (41 ft. Lbs.). Next, install the Engine Mount frame bracket and fix its bolts at 45 nm (33 ft. Lbs.). Lower the engine subsequently use the jack to remove it while you install the through-bolts of the Engine Mount and tighten them to 74 nm (55 ft. Lbs.) before installing the nuts and securing them at 63 nm (46 ft. Lbs.). In case the Starter was removed, reinstallation is required before lowering the vehicle to the ground.