How to install the steering knuckle on 2000 Chevrolet Tracker?

Lubricate inner seal lip and hollow, then install the drive-shaft inner seal against the stepped surface; lubricate and fit the outer seal. Mount knuckle to ball stud, strut bracket, lower-control-arm nut and tie-rod nut. Seal spindle and knuckle, fill spindle recess, install spindle, shield, hub, bearings, seals, rotor and wheel. Lower vehicle, check alignment.

OEM 2000 Chevrolet Tracker Steering Knuckle

Front Steering Knuckle

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Steering Knuckles found

View related parts
2000 Chevrolet Tracker Knuckle Part Number: 91175803
Product Specifications
- Other Name: Knuckle, Steering
- Item Weight: 11.30 Pounds
- Item Dimensions: 14.1 x 14.8 x 8.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 91175803
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Chevrolet Tracker Submodels:
- Base, LSi, LT, ZR2 | 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
View related parts
2000 Chevrolet Tracker Knuckle Part Number: 91175802
Product Specifications
- Other Name: Knuckle, Steering
- Item Weight: 10.30 Pounds
- Item Dimensions: 13.7 x 12.6 x 4.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 91175802
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Chevrolet Tracker Submodels:
- Base, LSi, LT, ZR2 | 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS

2000 Chevrolet Tracker Steering Knuckle

With a comprehensive array of OEM 2000 Chevrolet Tracker Steering Knuckle, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2000 Chevrolet Tracker Steering Knuckle are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2000 Chevrolet Tracker Steering Knuckle Parts and Q&A

Q: How to install the steering knuckle on 2000 Chevrolet Tracker?
A: Lubricate inner seal lip and hollow, then install the drive-shaft inner seal against the stepped surface; lubricate and fit the outer seal. Mount knuckle to ball stud, strut bracket, lower-control-arm nut and tie-rod nut. Seal spindle and knuckle, fill spindle recess, install spindle, shield, hub, bearings, seals, rotor and wheel. Lower vehicle, check alignment.

Related 2000 Chevrolet Tracker Parts

Alternate Year Models

1999 Chevrolet Tracker Steering Knuckle 2001 Chevrolet Tracker Steering Knuckle