How to service the power mirror switch on 2000 Chevrolet Tracker?

You should begin by removing the 3 screws and taking off the IP steering column opening trim plate from the instrument panel. After that, squeeze and pull the upper and lower retaining tabs at the back of the instrument panel to release the outside remote control rearview mirror switch . Take the rearview mirror switch out of the instrument panel so you can remove the electrical connector, then pull the switch out of the vehicle. Connect the electrical connector to the outside remote control rearview mirror switch before putting the switch back into the instrument panel and making sure the retaining tabs snap in place. Now, put the IP steering column opening trim plate back in place and fix it using the 3 screws .

OEM 2000 Chevrolet Tracker Mirror Switch

Power Mirror Control Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Mirror Switch found

View related parts
2000 Chevrolet Tracker Mirror Switch, Rear Part Number: 30020878
Product Specifications
- Other Name: Switch, Rear View Mirror; Power Mirror Switch; Switch, Rear View Mirror - Inside & Outside
- Position: Rear
- Item Weight: 0.40 Pounds
- Item Dimensions: 9.0 x 5.7 x 4.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 30020878
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Chevrolet Tracker Submodels:
- Base, LSi, LT, ZR2 | 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS

2000 Chevrolet Tracker Mirror Switch

With a comprehensive array of OEM 2000 Chevrolet Tracker Mirror Switch, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2000 Chevrolet Tracker Mirror Switch are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2000 Chevrolet Tracker Mirror Switch Parts and Q&A

Q: How to service the power mirror switch on 2000 Chevrolet Tracker?
A: You should begin by removing the 3 screws and taking off the IP steering column opening trim plate from the instrument panel. After that, squeeze and pull the upper and lower retaining tabs at the back of the instrument panel to release the outside remote control rearview mirror switch . Take the rearview mirror switch out of the instrument panel so you can remove the electrical connector, then pull the switch out of the vehicle. Connect the electrical connector to the outside remote control rearview mirror switch before putting the switch back into the instrument panel and making sure the retaining tabs snap in place. Now, put the IP steering column opening trim plate back in place and fix it using the 3 screws .

Related 2000 Chevrolet Tracker Parts

Alternate Year Models

1999 Chevrolet Tracker Mirror Switch 2001 Chevrolet Tracker Mirror Switch