How to replace the steering wheel on 2000 Chevrolet Monte Carlo?

Before replacing the Steering Wheel users should disable sir system functions and turn the ignition to off. Take out the inflatable restraint Steering Wheel module before drawing an alignment mark on the Steering Wheel hub which should match up with the slash mark on the Steering Shaft. Set the Steering Wheel nut to meet the end of the Steering Shaft and position it properly. You can remove the Steering Wheel from its Steering Shaft by using the j 1859-a (Steering Wheel Puller) assembled with the j 42578 (Steering Wheel Puller Legs). The sir connector needs to be unrousted from the Steering Wheel before you can take it out of the vehicle. When installing the new Steering Wheel fit it onto the Steering Column and direct the sir connector through the opening afterward use the scribe mark to line up with the slash mark on the Steering Shaft. Put the Steering Wheel in its place while securing the Steering Shaft nut at 45 nm (33 ft. Lbs.). Steering Wheel module from inflatables reinstallation leads to sir system activation. Conclude by checking the Horn functionality along with examining Steering Wheel operation and the controls on the Steering Wheel.

OEM 2000 Chevrolet Monte Carlo Steering Wheel

Navigation Steering Wheel

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Steering Wheels found

View related parts
2000 Chevrolet Monte Carlo Steering Wheel Part Number: 10291236
Product Specifications
- Item Weight: 3.90 Pounds
- Item Dimensions: 15.5 x 16.1 x 5.3 inches
- Condition: New
- SKU: 10291236
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2000 Chevrolet Monte Carlo Submodels:
- LS, LS Competition, LS Sport, LT, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
2000 Chevrolet Monte Carlo Steering Wheel Part Number: 10355134
Product Specifications
- Other Name: Wheel, Steering
- Item Weight: 4.30 Pounds
- Item Dimensions: 17.7 x 16.8 x 6.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10355134
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Chevrolet Monte Carlo Submodels:
- LS, LS Competition, LS Sport, LT, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
2000 Chevrolet Monte Carlo Steering Wheel Part Number: 10355136
Product Specifications
- Other Name: Wheel, Steering
- Item Weight: 4.10 Pounds
- Item Dimensions: 17.9 x 17.0 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10355136
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Chevrolet Monte Carlo Submodels:
- LS, LS Competition, LS Sport, LT, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS

2000 Chevrolet Monte Carlo Steering Wheel

With a comprehensive array of OEM 2000 Chevrolet Monte Carlo Steering Wheel, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2000 Chevrolet Monte Carlo Steering Wheel are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2000 Chevrolet Monte Carlo Steering Wheel Parts and Q&A

Q: How to replace the steering wheel on 2000 Chevrolet Monte Carlo?
A: Before replacing the Steering Wheel users should disable sir system functions and turn the ignition to off. Take out the inflatable restraint Steering Wheel module before drawing an alignment mark on the Steering Wheel hub which should match up with the slash mark on the Steering Shaft. Set the Steering Wheel nut to meet the end of the Steering Shaft and position it properly. You can remove the Steering Wheel from its Steering Shaft by using the j 1859-a (Steering Wheel Puller) assembled with the j 42578 (Steering Wheel Puller Legs). The sir connector needs to be unrousted from the Steering Wheel before you can take it out of the vehicle. When installing the new Steering Wheel fit it onto the Steering Column and direct the sir connector through the opening afterward use the scribe mark to line up with the slash mark on the Steering Shaft. Put the Steering Wheel in its place while securing the Steering Shaft nut at 45 nm (33 ft. Lbs.). Steering Wheel module from inflatables reinstallation leads to sir system activation. Conclude by checking the Horn functionality along with examining Steering Wheel operation and the controls on the Steering Wheel.