How to replace the Knock Sensor (KS) for Bank 1 on 2000 Chevrolet Monte Carlo?

Begin the Knock Sensor (KS) for Bank 1 replacement by turning OFF the ignition first and draining the cooling system completely. Lift the vehicle and extract the knock sensor wiring harness connector from its position at the knock sensor. You need to disconnect the knock sensor from the engine block . Install the sensor without thread sealant because the factory coating on its threads plays a key role in accurate detonation detection. Insert the knock sensor into position within the engine block and apply torque to 19 N.m (14 lb ft). After connecting the knock sensor electrical connector to the knock sensor and lowering the vehicle you should start the engine. Complete the cooling system before checking the coolant level.

OEM 2000 Chevrolet Monte Carlo Knock Sensor

Engine Knock Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Knock Sensors found

View related parts
2000 Chevrolet Monte Carlo Knock Sensor Part Number: 12591625
$67.91 MSRP: $137.92
You Save: $70.01 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor)
- Replaces: 10456215
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.1 x 2.1 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 12591625
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Chevrolet Monte Carlo Submodels:
- LS, LT, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car, Z34 | 6 Cyl 3.8 L GAS
View related parts
2000 Chevrolet Monte Carlo Knock Sensor Part Number: 10456238
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor)
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.1 x 2.0 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10456238
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Chevrolet Monte Carlo Submodels:
- LS, LS Competition, LS Sport, Z34 | 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS

2000 Chevrolet Monte Carlo Knock Sensor

With a comprehensive array of OEM 2000 Chevrolet Monte Carlo Knock Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2000 Chevrolet Monte Carlo Knock Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2000 Chevrolet Monte Carlo Knock Sensor Parts and Q&A

Q: How to replace the Knock Sensor (KS) for Bank 1 on 2000 Chevrolet Monte Carlo?
A: Begin the Knock Sensor (KS) for Bank 1 replacement by turning OFF the ignition first and draining the cooling system completely. Lift the vehicle and extract the knock sensor wiring harness connector from its position at the knock sensor. You need to disconnect the knock sensor from the engine block . Install the sensor without thread sealant because the factory coating on its threads plays a key role in accurate detonation detection. Insert the knock sensor into position within the engine block and apply torque to 19 N.m (14 lb ft). After connecting the knock sensor electrical connector to the knock sensor and lowering the vehicle you should start the engine. Complete the cooling system before checking the coolant level.