OEM 2000 Chevrolet Metro Exhaust Manifold

Engine Exhaust Manifold
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Exhaust Manifolds found

  • 2000 Chevy Metro Exhaust Manifold - 91176019
    2000 Chevy Metro Exhaust Manifold Diagram - 91176019
    View related parts
    Product Specifications
    • Other Name: Manifold, Engine Exhaust Manifold
    • Item Weight: 11.50 Pounds
    • Item Dimensions: 21.0 x 14.3 x 9.3 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 91176019
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    More Info
    Fits the following 2000 Chevrolet Metro Submodels:
    • Base, LSi | 4 Cyl 1.3 L GAS
  • 2000 Chevy Metro Exhaust Manifold - 91171190
    2000 Chevy Metro Exhaust Manifold Diagram - 91171190
    View related parts
    Product Specifications
    • Other Name: Manifold, Engine Exhaust Manifold
    • Item Weight: 6.40 Pounds
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 91171190
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    Fits the following 2000 Chevrolet Metro Submodels:
    • Base | 3 Cyl 1.0 L GAS
  • 2000 Chevy Metro Exhaust Manifold - 91176795
    2000 Chevy Metro Exhaust Manifold Diagram - 91176795
    View related parts
    Product Specifications
    • Other Name: Manifold, Engine Exhaust Manifold
    • Item Weight: 11.50 Pounds
    • Item Dimensions: 15.4 x 10.2 x 4.3 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 91176795
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    More Info
    Fits the following 2000 Chevrolet Metro Submodels:
    • Base, LSi | 3 Cyl 1.0 L GAS, 4 Cyl 1.3 L GAS
  • 2000 Chevy Metro Exhaust Manifold - 96069341
    2000 Chevy Metro Exhaust Manifold Diagram - 96069341
    View related parts
    Product Specifications
    • Other Name: Manifold, Engine Exhaust Manifold; Manifold
    • Item Weight: 7.60 Pounds
    • Item Dimensions: 10.3 x 10.1 x 3.6 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 96069341
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    More Info
    Fits the following 2000 Chevrolet Metro Submodels:
    • Base | 3 Cyl 1.0 L GAS

2000 Chevrolet Metro Exhaust Manifold

With a comprehensive array of OEM 2000 Chevrolet Metro Exhaust Manifold, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2000 Chevrolet Metro Exhaust Manifold are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2000 Chevrolet Metro Exhaust Manifold Parts and Q&A

  • Q: How to service the exhaust manifold on 2000 Chevrolet Metro?
    A: The beginning of Exhaust Manifold service requires first checking the exhaust system for coolness to prevent burns along with disconnecting the Battery Cable. Rise the vehicle and maintain support while removing the two bolts from the front pipe along with the twc assembly if installed or the wu/twc assembly. The first service task requires users to disconnect the heated Oxygen Sensor (H02S 1) electrical connector while the sensor remains on the ground below the car. The next step is to remove the Exhaust Manifold heat shield's three bolts and afterward detach four bolts and three nuts and the engine hanger from the Exhaust Manifold. Disconnect the Exhaust Manifold Gasket which has been located on the Cylinder Head. Place a new Exhaust Manifold Gasket on the Cylinder Head after which you can install the Exhaust Manifold together with the engine hanger, four bolts and three nuts before tightening them to 23 nm (17 ft. Lbs.). The Exhaust Manifold heat shield needs to attach to the Exhaust Manifold via three bolts which should be tightened to 15 nm (11 ft. Lbs.). Install the front pipe/twc assembly or the warm up/twc part onto the Exhaust Manifold after applying a new seal by fastening two bolts to 45 nm (33 ft. Lbs.) torque. After lowering the vehicle, install the heated Oxygen Sensor (H02S 1) with proper torque of 40 to 50 nm (29 to 36 ft. Lbs.) before connecting its electrical connector and reattaching the negative Battery Cable. The examination should include a check for exhaust system gas leakage.

Related 2000 Chevrolet Metro Parts