How to Service Canister Purge Valves on 2000 Chevrolet Malibu?

To maintain Canister Purge Valves, one will shift the ignition off and will mark the EVAP positions of the hoses. Unscrew the electrical connector, hoses, remove the mounting bolt, and remove the valves. To install, screw the valves to the manifold, tighten the retaining bolt as well as reconnect the electrical connector and hoses.

OEM 2000 Chevrolet Malibu Canister Purge Valves

Fuel Tank Evaporator Purge Control Valve

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Canister Purge Valves found

View related parts
2000 Chevrolet Malibu Purge Valve Part Number: 1997297
Product Specifications
- Other Name: Valve Assembly-Evaporator Emission Canister Purge Solenoid; Vapor Canister Vent Solenoid.; Purge Solenoid; Vapor Canister; Purge Control Valve; Valve, Fuel Tank Evaporator/Purge Control
- Item Weight: 0.50 Pounds
- Item Dimensions: 4.6 x 2.9 x 2.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1997297
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Chevrolet Malibu Submodels:
- Base, LS | 6 Cyl 3.1 L GAS

2000 Chevrolet Malibu Canister Purge Valves

With a comprehensive array of OEM 2000 Chevrolet Malibu Canister Purge Valves, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2000 Chevrolet Malibu Canister Purge Valves are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2000 Chevrolet Malibu Canister Purge Valves Parts and Q&A

Q: How to Service Canister Purge Valves on 2000 Chevrolet Malibu?
A: To maintain Canister Purge Valves, one will shift the ignition off and will mark the EVAP positions of the hoses. Unscrew the electrical connector, hoses, remove the mounting bolt, and remove the valves. To install, screw the valves to the manifold, tighten the retaining bolt as well as reconnect the electrical connector and hoses.