How to Replace an Alternator Bracket on 2000 Chevrolet Impala?

You must disconnect the battery negative cable from the battery next to remove the generator bracket bolts and the generator before you can separate the generator bracket. You should then remove the engine lift hook. The first step for installation includes attaching the engine lift hook after which you should install the generator bracket to the engine and tighten the bracket bolts by hand. Screw in each generator bracket bolt to 50 n.m while tightening (37 lb ft) before you reattach the generator followed by reconnecting the battery negative cable to the battery.

OEM 2000 Chevrolet Impala Alternator Bracket

Alternator Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Alternator Bracket found

View related parts
2000 Chevrolet Impala Alternator Bracket Part Number: 12567695
$18.37 MSRP: $28.79
You Save: $10.42 (37%)
Product Specifications
- Other Name: Bracket, Generator Mounting; Mount Bracket; Alternator Mount Bracket; Alternator Front Bracket
- Replaces: 24509020
- Item Weight: 1.80 Pounds
- Item Dimensions: 7.5 x 6.9 x 6.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12567695
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Chevrolet Impala Submodels:
- Base | 6 Cyl 3.4 L GAS

2000 Chevrolet Impala Alternator Bracket

With a comprehensive array of OEM 2000 Chevrolet Impala Alternator Bracket, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2000 Chevrolet Impala Alternator Bracket are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2000 Chevrolet Impala Alternator Bracket Parts and Q&A

Q: How to Replace an Alternator Bracket on 2000 Chevrolet Impala?
A: You must disconnect the battery negative cable from the battery next to remove the generator bracket bolts and the generator before you can separate the generator bracket. You should then remove the engine lift hook. The first step for installation includes attaching the engine lift hook after which you should install the generator bracket to the engine and tighten the bracket bolts by hand. Screw in each generator bracket bolt to 50 n.m while tightening (37 lb ft) before you reattach the generator followed by reconnecting the battery negative cable to the battery.

Related 2000 Chevrolet Impala Parts

Alternate Year Models

2001 Chevrolet Impala Alternator Bracket