OEM 2000 Cadillac Seville Throttle Position Sensor

2000 Cadillac Seville Throttle Position Sensor Parts and Q&A

• Q: How to service the Throttle Position Sensor on 2000 Cadillac Seville?

  A: To service the Throttle Position Sensor, you should remove the negative Battery Cable. Removed the nuts on fuel injector sight shield and then seek to separate the iac electrical connector of the ac sensor and as well as the tp sensor electrical connector from the tp sensor . Then, the Throttle Body assembly and the tp sensor mounting bolts should be taken off from the tp sensor , and then the tp sensor should be removed from the Throttle Body . Remove the old 0-ring, put in a new one on the tp sensor. Mount the tp sensor onto the Throttle Body and torque tp sensor screws to 2.3 n.m (20 lb in). Skip the Throttle Body assembly, but reconnect the tp sensor electrical connector and the iac electrical connector to the iac sensor, what is the matter. Reconnect the negative Battery Cable, and install the fuel injector sight shield to the engine and tighten with the nuts to 3 n.m (27 lb in). Lastly, replace the rear seat cushion and do the tp sensor learn with the ignition on, waiting for a minute before you turn it off, and then wait for another 15 seconds.