How to replace the engine mount on 2000 Buick Century?

Starting the Engine Mount replacement requiresyou to disconnect the ground (negative) Battery Cable. First disconnect the duct from the throttle body air inlet then extract the Engine Mount struts. Commence by raising and properly supporting the vehicle before removing the three-way catalytic converter pipe from its position on the right Exhaust Manifold. The installation requires wheel removal of the right front side together with its tire followed by the right engine splash shield. The needed sequence starts with removing the Engine Mount lower nuts before lowering the vehicle and using j28467-b universal engine support fixture (J28467-B) together with j28467-90a engine support adapters (J28467-90A) and j36462-a engine support adapter leg set (J36462-A) to lift the engine. The first step involves removing the Engine Mount bracket-to-oil pan bolts until the Engine Mount and its bracket along with the Engine Mount upper nuts are extracted. The installation process starts with mounting the Engine Mount onto the Engine Mount bracket and securing its upper nuts at 47 nm (35 ft. Lbs.). Platform the Engine Mount bracket together with the Engine Mount onto the oil pan while tightening the Engine Mount bracket-to-oil pan bolts to 58 nm (43 ft. Lbs.). Drop the vehicle and engine combined followed by a return and proper suspension of the vehicle to install the Engine Mount lower nuts at 43 nm (32 ft. Lbs). After reinstalling the right engine splash shield and right front wheel with tire you must join the three-way catalytic converter pipe to the right (rear) exhaust manifold. To finish the repair process first lower the vehicle and then remove the j28467-b before reinstalling the Engine Mount struts and attaching the throttle body air inlet duct followed by reconnecting the battery ground (negative) cable.

OEM 2000 Buick Century Engine Mount

Engine Motor Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Engine Mounts found

View related parts
2000 Buick Century Motor Mount Part Number: 10448575
$69.62 MSRP: $118.53
You Save: $48.91 (42%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Mount, Engine Mount Dampening; Engine Mount Torque Strut; Engine Mount Bracket; Spring Insulator; Lower Mount; Mount Insulator; Mount; Mount, Engine Mounting; Engine Mount
- Replaces: 17998813, 22113282, 22178657, 22146018, 22175206, 10340740, 10448574, 10448576, 22146466
- Item Weight: 4.20 Pounds
- Item Dimensions: 11.6 x 5.1 x 5.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10448575
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Buick Century Submodels:
- Custom, Limited, Special Edition | 6 Cyl 3.1 L GAS
View related parts
2000 Buick Century Mount Bracket Part Number: 12594433
$30.60 MSRP: $61.44
You Save: $30.84 (51%)
ADD TO CART
Product Specifications
- Other Name: Bracket-Engine Mount Strut & Engine Lift; Engine Mount Bracket; Transmission Mount; Motor Mount; Strut Bracket; Lift Bracket; Rear Brace; Engine Mounting Bracket; Engine Lift Bracket
- Replaces: 10154776, 12570320
- Item Weight: 4.80 Pounds
- Item Dimensions: 4.3 x 4.4 x 15.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12594433
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Buick Century Submodels:
- Custom, Limited, Special Edition | 6 Cyl 3.1 L GAS
View related parts
2000 Buick Century Strut Mount Part Number: 10232891
$137.10 MSRP: $195.31
You Save: $58.21 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket, Engine Lift; Torque Strut Mount; Motor Mount; Mount Bracket; Strut Bracket; Strut Mount Bracket; Strut Lower Bracket; Bracket, Engine Mounting
- Item Weight: 2.20 Pounds
- Item Dimensions: 8.4 x 4.7 x 3.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 10232891
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Buick Century Submodels:
- Custom, Limited, Special Edition | 6 Cyl 3.1 L GAS
View related parts
2000 Buick Century Mount Bracket Part Number: 10216970
Product Specifications
- Other Name: Bracket, Engine Mounting; Engine Mount Bracket; Transmission Mount; Motor Mount; Engine Bracket; Lower Bracket; Bracket
- Item Weight: 1.20 Pounds
- Item Dimensions: 9.2 x 3.5 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10216970
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Buick Century Submodels:
- Custom, Limited | 6 Cyl 3.1 L GAS
View related parts
2000 Buick Century Strut Mount Part Number: 10230877
$4.05 MSRP: $6.35
You Save: $2.30 (37%)
Product Specifications
- Other Name: Strut, Engine Mounting; Engine Mount Torque Strut; Engine Mount Bracket; Engine Torque Strut; Motor Mount; Torque Strut; Strut; Strut, Engine Mount Dampening
- Item Weight: 1.30 Pounds
- Item Dimensions: 8.3 x 3.2 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10230877
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Buick Century Submodels:
- Custom, Limited, Special, Special Edition | 4 Cyl 2.2 L GAS, 6 Cyl 3.1 L GAS
View related parts
2000 Buick Century Mount Bracket Part Number: 24504390
Product Specifications
- Other Name: Bracket, Engine Mounting; Engine Mount Torque Strut; Engine Mount Bracket; Transmission Mount; Motor Mount; Strut Bracket; Engine Bracket; Compressor Mount Bracket; Torque Strut Bracket; A/C Compressor Mounting.
- Item Weight: 5.70 Pounds
- Item Dimensions: 4.4 x 4.3 x 12.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 24504390
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Buick Century Submodels:
- Custom, Limited, Special Edition | 6 Cyl 3.1 L GAS

2000 Buick Century Engine Mount

With a comprehensive array of OEM 2000 Buick Century Engine Mount, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2000 Buick Century Engine Mount are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2000 Buick Century Engine Mount Parts and Q&A

Q: How to replace the engine mount on 2000 Buick Century?
A: Starting the Engine Mount replacement requiresyou to disconnect the ground (negative) Battery Cable. First disconnect the duct from the throttle body air inlet then extract the Engine Mount struts. Commence by raising and properly supporting the vehicle before removing the three-way catalytic converter pipe from its position on the right Exhaust Manifold. The installation requires wheel removal of the right front side together with its tire followed by the right engine splash shield. The needed sequence starts with removing the Engine Mount lower nuts before lowering the vehicle and using j28467-b universal engine support fixture (J28467-B) together with j28467-90a engine support adapters (J28467-90A) and j36462-a engine support adapter leg set (J36462-A) to lift the engine. The first step involves removing the Engine Mount bracket-to-oil pan bolts until the Engine Mount and its bracket along with the Engine Mount upper nuts are extracted. The installation process starts with mounting the Engine Mount onto the Engine Mount bracket and securing its upper nuts at 47 nm (35 ft. Lbs.). Platform the Engine Mount bracket together with the Engine Mount onto the oil pan while tightening the Engine Mount bracket-to-oil pan bolts to 58 nm (43 ft. Lbs.). Drop the vehicle and engine combined followed by a return and proper suspension of the vehicle to install the Engine Mount lower nuts at 43 nm (32 ft. Lbs). After reinstalling the right engine splash shield and right front wheel with tire you must join the three-way catalytic converter pipe to the right (rear) exhaust manifold. To finish the repair process first lower the vehicle and then remove the j28467-b before reinstalling the Engine Mount struts and attaching the throttle body air inlet duct followed by reconnecting the battery ground (negative) cable.