Make sure this part fits

GM 24504390
Mount Bracket

1996-2005 GM

Customer Questions & Expert Answers (7)
GM 24504390 Mount Bracket
  • Part Description
    Bracket, Engine Mounting; Engine Mount Torque Strut; Engine Mount Bracket; Transmission Mount; Motor Mount
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    1997-2005 Buick CenturyCustom, Limited, Special Edition6 Cyl 3.1 L GAS
    1996 Buick RegalCustom6 Cyl 3.1 L GAS
    2002-2005 Buick RendezvousCX, CX Plus, CXL, CXL Plus6 Cyl 3.4 L GAS
    2000-2005 Chevrolet ImpalaBase6 Cyl 3.4 L GAS
    1996-2001 Chevrolet LuminaBase, LS, LTZ6 Cyl 3.1 L GAS
    1996 Chevrolet Lumina APVBase, LS6 Cyl 3.4 L GAS
    1996-2005 Chevrolet Monte CarloLS, LS Competition, LS Sport6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS
    1997-2005 Chevrolet VentureBase, LS, LT, Plus, Value, Warner Bros.6 Cyl 3.4 L GAS
    1996-1997 Oldsmobile Cutlass SupremeBase, SL6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS
    1996-2004 Oldsmobile SilhouetteBase, GL, GLS, GS, Premiere6 Cyl 3.4 L GAS
    View More
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 24504390 is the right part for my car? Posted by ChevyPartsDeal Specialist
    A:
    Please Select Your Vehicle model to see if part number 24504390 is suitable before ordering.
    Posted by ChevyPartsDeal Specialist
    Q:
    What is the first step to replace the engine mount for the 2002 Buick Century? Posted by Customer
    A:
    Disconnect the battery ground (negative) cable.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Engine Mount
    Q:
    How should the oil pan be supported during the process for the 2003 Buick Rendezvous? Posted by Customer
    A:
    Place a block of wood between the utility stand and the oil pan, then use the utility stand to raise the oil pan.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Engine Mount
    Q:
    What is the next step after securing the engine mount upper nuts for the 2000 Chevrolet Lumina? Posted by Customer
    A:
    Install the engine mount bracket with the engine mount to the oil pan and secure it with the engine mount bracket-to-oil pan bolts, tightening them to 58 Nm (43 ft. lbs.).
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Engine Mount
    Q:
    What is the next step after raising the 2002 Chevrolet Impala? Posted by Customer
    A:
    Detach the three-way catalytic converter pipe from the right rear exhaust manifold.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Engine Mount
    Q:
    What conditions indicate that the engine mount should be replaced for the 2000 Chevrolet Monte Carlo? Posted by Customer
    A:
    Replace the engine mount if the hard rubber surface has heat check cracks, the rubber is separated from the metal plate, or the rubber is split through the center.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Engine Mount
    Q:
    What should be observed while raising the engine for the 2000 Chevrolet Venture? Posted by Customer
    A:
    Observe the engine mount and replace it if the hard rubber surface is covered with heat check cracks, if the rubber is separated from the metal plate, or if the rubber is split through the center.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Engine Mount
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Mount Bracket 24504390 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 24504390 Mount Bracket is available in the market under the name GM Engine Mount, Engine Torque Strut Mount. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 24504390 Mount Bracket fits certain Chevrolet Impala, Lumina, Monte Carlo models, as well as Buick Regal, Century, Rendezvous. Additionally, it is compatible with Pontiac Grand Prix, Aztek, Montana and Oldsmobile Cutlass Supreme, Silhouette models.
The original GM component designated by Manufacturer Part Number 24504390 maintains top performance when functioning as the Bracket, Engine Mounting; Engine Mount Torque Strut; Engine Mount Bracket; Transmission Mount; Motor Mount unit. The component 24504390 is constructed from durable material and its dimensions span 4.4 x 4.3 x 12.6 inches while weighing 5.70 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Strut Bracket; Engine Bracket; Compressor Mount Bracket; Torque Strut Bracket; A/C Compressor Mounting.. The part 24504390 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts? Our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.