Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 15773661
Outlet Pipe, Lower

1999-2007 GM

Customer Questions & Expert Answers (13)
GM 15773661 Outlet Pipe, Lower
GM 15773661 Outlet Pipe, Lower
GM 15773661 Outlet Pipe, Lower
GM 15773661 Outlet Pipe, Lower
GM 15773661 Outlet Pipe, Lower
  • Part Description
    Pipe, Transmission Fluid Cooler Lower
  • Position
    Lower
  • Replaces
    15190201, 15710123, 15052879
  • Manufacturer
    General Motors
Make sure this part fits
$35.11 MSRP: $57.85
You Save: $22.74 (40%)
Ships in 1-2 Business Days
1
ADD TO CART

  • 15773661 Outlet Pipe, Lower is Ref No. 3 in the diagram below

    2002 Chevy Tahoe Outlet Pipe, Lower Diagram for 15773661
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 15773661

  • Vehicle Fitment

    Year Make Model Trim Engine
    2002-2005 Cadillac EscaladeBase8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    1999-2007 Chevrolet Silverado 1500Base, LS, LT, LTZ, SS, WT, Z71 Off-Road6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 1500 ClassicLS, LT, SS, WT8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2005-2006, 2001-2003 Chevrolet Silverado 1500 HDBase, LS, LT8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 1500 HD ClassicLT8 Cyl 6.0 L GAS
    1999-2004 Chevrolet Silverado 2500Base, LS, LT, WT8 Cyl 5.3 L GAS, 8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS
    2001-2007 Chevrolet Silverado 2500 HDBase, LS, LT, LTZ, WT8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 2500 HD ClassicLS, LT, WT8 Cyl 6.0 L GAS
    2001-2006 Chevrolet Silverado 3500Base, LS, LT, WT8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 3500 ClassicLS, LT, WT8 Cyl 6.0 L GAS
    View More
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Is this 15773661 designed for my car? Posted by ChevyPartsDeal Specialist
    A:
    Please Select Your Vehicle model to see if part number 15773661 is suitable before ordering.
    Posted by ChevyPartsDeal Specialist
    Q:
    What is the procedure for removing the retaining clip for the 2003 Cadillac Escalade? Posted by Customer
    A:
    Hold one leg of the retaining clip and use a small pick-type tool or bent screwdriver to gently pry the other end from the quick connect fitting, then rotate and remove the clip completely, discarding the old clip.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Oil Cooler Hose
    Q:
    What are the final steps after removing the adjustable jack for the 2007 Chevrolet Silverado 1500 Classic? Posted by Customer
    A:
    Install the front differential carrier shield if equipped, install the engine protection shield if equipped, remove the jack or utility stands from the rear of the vehicle, and lower the vehicle.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Oil Cooler Hose
    Q:
    What should be done for an 8.1L engine after removing the hoses for the 2004 Chevrolet Silverado 2500? Posted by Customer
    A:
    Remove the hose bracket bolt, disconnect the quick connect fittings at the engine, and remove the hose assembly, discarding the gasket and inspecting for damage.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Oil Cooler Hose
    Q:
    What should be ensured during installation of the oil cooler hose assembly for the 2007 Chevrolet Silverado 3500 Classic? Posted by Customer
    A:
    Ensure a distinct snap is heard when assembling the tube ends of the hose assembly to the quick connectors, checking that the tube is fully inserted by giving it a forceful pull.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Oil Cooler Hose
    Q:
    What are the steps for positioning the differential carrier during installation for the 2005 Chevrolet Silverado 1500? Posted by Customer
    A:
    Raise the jack to position the differential carrier, install the lower mounting bolt and nut without tightening, pivot the carrier up and back while supported, and install the upper mounting bolt and nut without tightening.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Oil Cooler Hose
    Q:
    What is the final step for the 6.0L engine after lowering for the 2004 Chevrolet Tahoe? Posted by Customer
    A:
    Install the oil cooler hoses to the hose clip on the fan shroud and snap it shut.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Oil Cooler Hose
    Q:
    What are the installation torque specifications for a 6.0L engine for the 2004 Chevrolet Silverado 3500? Posted by Customer
    A:
    Install the hose assembly with a new gasket, tighten the adapter bolts to 12 Nm (106 inch lbs.), and the bracket bolt to 25 Nm (18 ft. lbs.).
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Oil Cooler Hose
    Q:
    What is the next step after raising the 2006 GMC Sierra 1500? Posted by Customer
    A:
    Place an adjustable jack under the front differential carrier, remove the inner axle housing nuts and washers, and the differential carrier upper mounting bolt and nut.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Oil Cooler Hose
    Q:
    What are the steps for removing the oil cooler hose assembly for the 5.3L or 6.0L engine for the 2007 GMC Sierra 1500 Classic? Posted by Customer
    A:
    Remove the oil cooler hose bracket bolt, the oil cooler hose adapter bolts, and the oil cooler hose assembly along with the gasket, discarding the gasket and inspecting the fittings, connectors, and cooler hoses for damage.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Oil Cooler Hose
    Q:
    What should be done after tightening the upper and lower differential carrier bolts for the 2005 GMC Yukon? Posted by Customer
    A:
    Remove the adjustable jack, reinstall the front differential carrier shield and engine protection shield if equipped, remove the jack or utility stand from the rear, and lower the vehicle.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Oil Cooler Hose
    Q:
    What steps are involved in removing the oil cooler hose assembly for the 5.3L or 6.0L engine for the 2005 GMC Sierra 3500? Posted by Customer
    A:
    Remove the oil cooler hose bracket bolt, the oil cooler hose adapter bolts, and take out the oil cooler hose assembly and gasket, discarding the gasket while inspecting the fittings, connectors, and cooler hoses for damage.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Oil Cooler Hose
    Q:
    What is the first step in disconnecting the oil cooler for the 2007 GMC Sierra 3500 Classic? Posted by Customer
    A:
    Begin by disconnecting the engine oil cooler quick connect fittings.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Oil Cooler Hose
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Outlet Pipe, Lower 15773661 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 15773661 Outlet Pipe, Lower is available in the market under the name GM Cooling Hose, Oil Cooler Hose, Automatic Transmission Oil Cooler Line. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 15773661 Outlet Pipe, Lower fits certain Chevrolet Tahoe, Silverado 1500, Silverado 2500 HD models, as well as GMC Sierra 1500, Yukon, Sierra 2500 HD. Additionally, it is compatible with Cadillac Escalade models.
The original GM component designated by Manufacturer Part Number 15773661 maintains top performance when functioning as the Pipe, Transmission Fluid Cooler Lower unit at its Lower. The component 15773661 is constructed from durable material and its dimensions span 47.0 x 16.8 x 4.6 inches while weighing 1.10 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Pipe, Transmission Oil Cooler. The part 15773661 has available replacement options 15190201, 15710123, 15052879. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts? Our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.