Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 15809057
Inlet Pipe

2000-2007 GM

Customer Questions & Expert Answers (14)
GM 15809057 Inlet Pipe
GM 15809057 Inlet Pipe
GM 15809057 Inlet Pipe
GM 15809057 Inlet Pipe
GM 15809057 Inlet Pipe
GM 15809057 Inlet Pipe
  • Part Description
    Hose Assembly-Transmission Fluid Auxiliary Cooler Inlet
  • Replaces
    15052881, 15190206
  • Manufacturer
    General Motors
Make sure this part fits
$31.52 MSRP: $51.93
You Save: $20.41 (40%)
Ships in 1 Business Day
1
ADD TO CART

  • 15809057 Inlet Pipe is Ref No. 2 in the diagram below

    2002 Chevy Tahoe Inlet Pipe Diagram for 15809057
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 15809057

  • Vehicle Fitment

    Year Make Model Trim Engine
    2002-2005 Cadillac EscaladeBase8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2000-2007 Chevrolet Silverado 1500Base, LS, LT, LTZ, SS, WT, Z71 Off-Road8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 1500 ClassicLS, LT, SS, WT8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2005-2006, 2001-2003 Chevrolet Silverado 1500 HDBase, LS, LT8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 1500 HD ClassicLT8 Cyl 6.0 L GAS
    2000-2004 Chevrolet Silverado 2500Base, LS, LT, WT8 Cyl 5.3 L GAS, 8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS
    2001-2007 Chevrolet Silverado 2500 HDBase, LS, LT, LTZ, WT8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 2500 HD ClassicLS, LT, WT8 Cyl 6.0 L GAS
    2001-2006 Chevrolet Silverado 3500Base, LS, LT, WT8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 3500 ClassicLS, LT, WT8 Cyl 6.0 L GAS
    View More
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Is this 15809057 designed for my car? Posted by ChevyPartsDeal Specialist
    A:
    Please Select Your Vehicle model to see if part number 15809057 is suitable before ordering.
    Posted by ChevyPartsDeal Specialist
    Q:
    What are the torque specifications for the 8.1L engine during installation for the 2003 Cadillac Escalade? Posted by Customer
    A:
    Connect the quick connect fittings at the engine, install the hose bracket bolt, and tighten it to 50 Nm (37 ft. lbs.).
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Oil Cooler Hose
    Q:
    What should be done at the end of the installation process for the 2004 Chevrolet Silverado 1500? Posted by Customer
    A:
    Snap the plastic cap onto the quick connect fitting, ensuring it is fully seated with no gap present.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Oil Cooler Hose
    Q:
    How do you handle the differential carrier during the process for the 2007 Chevrolet Silverado 1500 Classic? Posted by Customer
    A:
    Place an adjustable jack under the front differential carrier, remove the inner axle housing nuts and washers from the bracket, and remove the differential carrier upper mounting bolt and nut. Pivot the differential carrier forward and down while supporting it with the adjustable jack, secure it to the jack, and remove the differential carrier lower mounting bolt and nut before lowering the jack 4 to 6 inches.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Oil Cooler Hose
    Q:
    What are the installation torque specifications for an 8.1L engine for the 2004 Chevrolet Silverado 2500? Posted by Customer
    A:
    Connect the quick connect fittings at the engine, install the hose bracket bolt, and tighten it to 50 Nm (37 ft. lbs.).
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Oil Cooler Hose
    Q:
    How should the differential carrier be handled for the 2006 Chevrolet Silverado 3500? Posted by Customer
    A:
    Pivot the differential carrier forward and down while supporting it with the jack, secure it, and then remove the lower mounting bolt and nut before lowering the jack 4 to 6 inches.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Oil Cooler Hose
    Q:
    What should be checked before installation of the oil cooler line for the 2004 Chevrolet Tahoe? Posted by Customer
    A:
    Ensure the oil cooler line has a plastic cap on the end connecting to the quick connect fitting; if not, obtain a new cap before installation.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Oil Cooler Hose
    Q:
    What should be done for the 8.1L engine regarding the oil cooler hoses for the 2007 Chevrolet Silverado 3500 Classic? Posted by Customer
    A:
    Install the oil cooler hoses to the clip.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Oil Cooler Hose
    Q:
    What is the final step for the 5.3L or 6.0L engine for the 2006 GMC Sierra 1500? Posted by Customer
    A:
    Install the hoses to the hose clip on the fan shroud, snap the clip shut, and connect the engine oil cooler quick connect fittings.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Oil Cooler Hose
    Q:
    What is the torque specification for the inner axle housing washers and nuts for the 2005 GMC Yukon? Posted by Customer
    A:
    Tighten them to 100 Nm (75 ft. lbs.).
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Oil Cooler Hose
    Q:
    What is the procedure for installing the oil cooler hoses for the RPO LY6 (6.0L) engine for the 2007 GMC Sierra 3500 Classic? Posted by Customer
    A:
    Install the oil cooler hoses to the clip.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Oil Cooler Hose
    Q:
    What steps are required for an 8.1L engine for the 2007 GMC Sierra 1500 Classic? Posted by Customer
    A:
    Remove the oil cooler hoses from the clip, raise and support the vehicle, place jack or utility stands at the rear, and if equipped, remove the engine protection shield and the front differential carrier shield.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Oil Cooler Hose
    Q:
    What should be done for a 5.3L or 6.0L engine for the 2005 GMC Sierra 3500? Posted by Customer
    A:
    Open the oil cooler hose clip on the lower fan shroud, remove the hoses from the clip, and then raise and support the vehicle.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Oil Cooler Hose
    Q:
    What steps are involved in removing the oil cooler hose assembly for the 6.0L engine for the 2004 GMC Yukon XL 2500? Posted by Customer
    A:
    Remove the oil cooler hose bracket bolt and the oil cooler hose adapter bolts, then take out the hose assembly and gasket, discarding the gasket while inspecting the fittings and hoses for damage.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Oil Cooler Hose
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Inlet Pipe 15809057 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 15809057 Inlet Pipe is available in the market under the name GM Cooling Hose, Oil Cooler Hose. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 15809057 Inlet Pipe fits certain Chevrolet Tahoe, Silverado 1500, Silverado 2500 HD models, as well as GMC Sierra 1500, Yukon, Sierra 2500 HD. Additionally, it is compatible with Cadillac Escalade models.
The original GM component designated by Manufacturer Part Number 15809057 maintains top performance when functioning as the Hose Assembly-Transmission Fluid Auxiliary Cooler Inlet unit. The component 15809057 is constructed from durable material and its dimensions span 16.5 x 11.3 x 8.3 inches while weighing 0.80 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Hose, Transmission Oil Cooler. The part 15809057 has available replacement options 15052881, 15190206. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts? Our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.