Make sure this part fits

GM 12613411
Injector

2010-2017 GM

Customer Questions & Expert Answers (11)
GM 12613411 Injector
  • Part Description
    Injector Assembly-Sequential Multiport Fuel; Fuel Injector
  • Replaced By
    12738848
  • Manufacturer
    General Motors
Make sure this part fits
$83.42 MSRP: $172.82
You Save: $89.40 (52%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2010-2013 Cadillac EscaladeHybrid, Hybrid Platinum8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV)
    2010-2013 Chevrolet AvalancheBlack Diamond LS, Black Diamond LT, Black Diamond LTZ, LS, LT, LTZ8 Cyl 5.3 L FLEX
    2010-2012 Chevrolet ColoradoLT8 Cyl 5.3 L GAS
    2010-2014 Chevrolet Express 1500Base, LS, LT8 Cyl 5.3 L FLEX
    2010-2017 Chevrolet Express 2500Base, LS, LT8 Cyl 4.8 L FLEX
    2010-2017 Chevrolet Express 3500Base, LS, LT8 Cyl 4.8 L FLEX
    2010-2013 Chevrolet Silverado 1500Hybrid, LS, LT, LTZ, WT, XFE6 Cyl 4.3 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV)
    2010-2014 Chevrolet Suburban 1500LS, LT, LTZ8 Cyl 5.3 L FLEX
    2010-2013 Chevrolet Suburban 2500LS, LT8 Cyl 6.0 L FLEX
    2010-2014 Chevrolet TahoeHybrid, LS, LT, LTZ, PPV, SSV8 Cyl 5.3 L FLEX, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV)
    View More
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 12613411 designed for my car? Posted by ChevyPartsDeal Specialist
    A:
    Please Select Your Vehicle model to see if part number 12613411 is suitable before ordering.
    Posted by ChevyPartsDeal Specialist
    Q:
    How do you disconnect the fuel injector for the 2010 Chevrolet Colorado? Posted by Customer
    A:
    Disconnect the fuel injector harness electrical connector from the fuel injector, then remove and discard the fuel injector retainer clip and the fuel injector from the fuel rail.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Fuel Injector
    Q:
    How should the new fuel injector O-ring seals be prepared before installation for the 2010 Chevrolet Express 3500? Posted by Customer
    A:
    Lubricate the new fuel injector O-ring seals with clean engine oil and install them onto the fuel injector.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Fuel Injector
    Q:
    How should the new fuel injector O-ring seals be prepared before installation for the 2010 Chevrolet Express 2500? Posted by Customer
    A:
    Lubricate the new fuel injector O-ring seals with clean engine oil and install them onto the fuel injector.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Fuel Injector
    Q:
    How should the new injector O-ring seals be prepared for the 2010 Chevrolet Silverado 1500? Posted by Customer
    A:
    Lubricate the new injector O-ring seals with clean engine oil.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Fuel Injector
    Q:
    What is the first step in replacing the fuel injector for the 2010 GMC Canyon? Posted by Customer
    A:
    Begin by removing the fuel rail assembly.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Fuel Injector
    Q:
    What is the correct way to install the fuel injector for the 2010 GMC Savana 2500? Posted by Customer
    A:
    Install a new retainer clip onto the fuel injector and insert the fuel injector into the fuel rail injector socket with the electrical connector facing outward, ensuring the retainer clip locks onto a flange on the fuel rail injector socket.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Fuel Injector
    Q:
    What should be done to avoid damage when replacing the fuel injector for the 2010 GMC Savana 1500? Posted by Customer
    A:
    Exercise caution to avoid damaging the electrical connector pins or nozzles, and do not immerse the fuel injector in any cleaner as it may cause damage.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Fuel Injector
    Q:
    What should be done to avoid damage when replacing the fuel injector for the 2010 GMC Savana 3500? Posted by Customer
    A:
    Exercise caution to avoid damaging the electrical connector pins or nozzles, and do not immerse the fuel injector in any cleaner as it may cause damage.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Fuel Injector
    Q:
    How should the fuel injector be removed for the 2010 GMC Sierra 1500? Posted by Customer
    A:
    While pulling the fuel injector downward, use a small tip punch to push down between the injector terminals until the injector is removed.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Fuel Injector
    Q:
    What is the procedure for removing the fuel injectors for the 2010 GMC Yukon? Posted by Customer
    A:
    Remove the fuel injector retainers and the injectors, discarding the upper and lower O-ring seals.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Fuel Injector
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Injector 12613411 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 12613411 Injector is available in the market under the name GM Fuel Injector. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 12613411 Injector fits certain Chevrolet Colorado, Tahoe, Avalanche models, as well as GMC Sierra 1500, Yukon, Canyon. Additionally, it is compatible with Cadillac Escalade and Hummer H3 models.
The original GM component designated by Manufacturer Part Number 12613411 maintains top performance when functioning as the Injector Assembly-Sequential Multiport Fuel; Fuel Injector unit. The component 12613411 is constructed from durable material and its dimensions span 4.6 x 1.7 x 1.6 inches while weighing 0.40 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Injector, Fuel Injection. The part 12613411 has available replacement options listed under 12738848. Each vehicle needs 8 units of the part marked as SKU 12613411. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts? Our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.