Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 26104070
Position Sensor

2003-2010 GM

Customer Questions & Expert Answers (16)
GM 26104070 Position Sensor
GM 26104070 Position Sensor
GM 26104070 Position Sensor
GM 26104070 Position Sensor
GM 26104070 Position Sensor
GM 26104070 Position Sensor
GM 26104070 Position Sensor
  • Part Description
    Sensor, Steering Column; Steering Wheel Speed Sensor; Steering Angle Sensor
  • Replaces
    26100011
  • Manufacturer
    General Motors
Make sure this part fits
$129.89 MSRP: $254.28
You Save: $124.39 (49%)
Ships in 1-2 Business Days
1
ADD TO CART

  • 26104070 Position Sensor is Ref No. 22 in the diagram below

    2009 Hummer H3T Position Sensor Diagram for 26104070
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 26104070

  • Vehicle Fitment

    Year Make Model Trim Engine
    2003-2006 Cadillac EscaladeBase8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2003-2006 Cadillac Escalade ESVBase8 Cyl 6.0 L GAS
    2003-2006 Cadillac Escalade EXTBase8 Cyl 6.0 L GAS
    2003-2006 Chevrolet Avalanche 1500Base, LS, LT, North Face, On Road Edition, WBH, Z66, Z718 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2003-2006 Chevrolet Avalanche 2500Base, LS, LT8 Cyl 8.1 L GAS
    2003-2006 Chevrolet Silverado 1500Base, Hybrid, LS, LT, SS, WT, Z71 Off-Road6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 1500 ClassicHybrid, LS, LT, SS, WT6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2005-2006, 2003 Chevrolet Silverado 1500 HDBase, LS, LT8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 1500 HD ClassicLT8 Cyl 6.0 L GAS
    2003-2004 Chevrolet Silverado 2500Base, LS, LT, WT8 Cyl 6.0 L GAS
    View More
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 26104070 is the right part for my car? Posted by ChevyPartsDeal Specialist
    A:
    Please Select Your Vehicle model to see if part number 26104070 is suitable before ordering.
    Posted by ChevyPartsDeal Specialist
    Q:
    What should be done after removing the cover for the 2003 Cadillac Escalade? Posted by Customer
    A:
    Next, remove the retaining bolts for the rear wheel position sensor.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Steering Angle Sensor
    Q:
    How do you lock the steering column for the 2005 Cadillac Escalade EXT? Posted by Customer
    A:
    Lock the steering column through the access hole in the lower trim cover using the Steering Column Anti-Rotation Pin (J 42640).
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Steering Angle Sensor
    Q:
    What is the first step in servicing and repairing the Steering Angle Sensor for the 2006 Chevrolet Avalanche 1500? Posted by Customer
    A:
    Identify the type of steering wheel position sensor from the provided illustrations before removal.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Steering Angle Sensor
    Q:
    What is the final step after reinstalling the steering column for the 2006 Chevrolet Avalanche 2500? Posted by Customer
    A:
    Remove the J 42640 and enable the SIR system.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Steering Angle Sensor
    Q:
    What should be aligned during the installation of the sensor for the 2006 Chevrolet Silverado 3500? Posted by Customer
    A:
    The alignment marks on the flush rotor flange cuff.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Steering Angle Sensor
    Q:
    What should be done if using a new sensor for the 2003 Chevrolet Suburban 1500? Posted by Customer
    A:
    The new sensor will have a pin installed; do not remove it until the sensor is seated.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Steering Angle Sensor
    Q:
    What should be done to prevent misalignment during reinstallation if reusing the sensor for the 2007 Chevrolet Silverado 1500 Classic? Posted by Customer
    A:
    Make an alignment mark on the flush rotor flange cuff before removal.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Steering Angle Sensor
    Q:
    How should the sensor be aligned during installation for the 2005 Chevrolet Tahoe? Posted by Customer
    A:
    Align the sensor with the steering shaft, ensuring the front of the sensor has a foam ring, a pin hole, a flushed rotor flange cuff, and an alignment mark.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Steering Angle Sensor
    Q:
    What should be noted about a new sensor during installation for the 2007 Chevrolet Silverado 3500 Classic? Posted by Customer
    A:
    A new sensor will come with a pin installed; do not remove it until the sensor is seated.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Steering Angle Sensor
    Q:
    What is the first step to replace the rear position sensor for the 2004 Chevrolet Silverado 1500? Posted by Customer
    A:
    First, raise the vehicle.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Steering Angle Sensor
    Q:
    What is the final step after completing the installation for the 2004 Chevrolet Silverado 2500? Posted by Customer
    A:
    Lower the vehicle and perform a four-wheel alignment.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Steering Angle Sensor
    Q:
    What should be done with a new sensor before installation for the 2007 GMC Sierra 1500 Classic? Posted by Customer
    A:
    It will be precentered; do not remove the pin until installation is complete.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Steering Angle Sensor
    Q:
    What should be done with the pin during installation for the 2004 GMC Sierra 1500? Posted by Customer
    A:
    Remove the pin retaining the position of the new sensor and install it immediately.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Steering Angle Sensor
    Q:
    What are the final steps after installing the sensor for the 2005 GMC Sierra 3500? Posted by Customer
    A:
    Install the rear wheel position sensor cover, reconnect the electrical connector, lower the vehicle, and perform a four-wheel alignment.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Steering Angle Sensor
    Q:
    What tools are required for servicing and repairing the Steering Angle Sensor for the 2006 GMC Yukon? Posted by Customer
    A:
    J 42640 Steering Column Anti-Rotation Pin.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Steering Angle Sensor
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Position Sensor 26104070 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 26104070 Position Sensor is available in the market under the name GM Steering Angle Sensor. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 26104070 Position Sensor fits certain Chevrolet Tahoe, Silverado 1500, Silverado 2500 HD models, as well as GMC Sierra 1500, Yukon, Sierra 2500 HD. Additionally, it is compatible with Cadillac Escalade, Escalade ESV, Escalade EXT and Hummer H3, H3T models.
The original GM component designated by Manufacturer Part Number 26104070 maintains top performance when functioning as the Sensor, Steering Column; Steering Wheel Speed Sensor; Steering Angle Sensor unit. The component 26104070 is constructed from durable material and its dimensions span 7.3 x 7.1 x 6.3 inches while weighing 1.30 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. The part 26104070 has available replacement options 26100011. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts? Our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.