Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 26001827
Shaft Bearings

1984-2019 GM

Customer Questions & Expert Answers (17)
GM 26001827 Shaft Bearings
GM 26001827 Shaft Bearings
GM 26001827 Shaft Bearings
GM 26001827 Shaft Bearings
  • Part Description
    Bearing Assembly, Steering Column
  • Position
    Upper
  • Manufacturer
    General Motors
Make sure this part fits
$45.81 MSRP: $78.00
You Save: $32.19 (42%)
Ships in 1-3 Business Days
1
ADD TO CART

  • 26001827 Shaft Bearings is Ref No. 11 in the diagram below

    2003 Cadillac DeVille Shaft Bearings Diagram for 26001827
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 26001827

  • Vehicle Fitment

    Year Make Model Trim Engine
    2005-2009 Buick LaCrosseCX, CXL, CXS, Super6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.3 L GAS
    2006-2011 Buick LucerneCX, CXL, CXL Special Edition, CXS, Super6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS
    1997-2001 Buick Park AvenueBase, Ultra6 Cyl 3.8 L GAS
    1988-1991 Buick RegalCustom, Gran Sport, Limited6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS, 6 Cyl 3.8 L GAS
    1984-1989 Buick SkyhawkCustom, Limited, SE, Sport, T-Type4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS
    1991-1993 Cadillac AllanteBase, Indianapolis 500 Pace Car, Value Leader8 Cyl 4.5 L GAS, 8 Cyl 4.6 L GAS
    1984-1988 Cadillac CimarronBase, d'Oro4 Cyl 2.0 L GAS, 6 Cyl 2.8 L GAS
    2006-2011 Cadillac DTSBase, Livery, Luxury, Platinum, Premium8 Cyl 4.6 L GAS
    2000-2005 Cadillac DeVilleBase, DHS, DTS, Protection Series8 Cyl 4.6 L GAS
    1998-2001 Cadillac EldoradoESC, ETC8 Cyl 4.6 L GAS
    View More
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 26001827 is the right part for my car? Posted by ChevyPartsDeal Specialist
    A:
    Please Select Your Vehicle model to see if part number 26001827 is suitable before ordering.
    Posted by ChevyPartsDeal Specialist
    Q:
    What should be removed after disabling the SIR coil for the 2007 Cadillac DTS? Posted by Customer
    A:
    Remove the steering wheel from the column, followed by the steering column from the vehicle.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Upper Steering Column Bearing
    Q:
    How do you remove the pivot pins from the steering column tilt head assembly for the 2007 Cadillac Escalade? Posted by Customer
    A:
    Use the Pivot Pin Remover (J 21854-01).
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Upper Steering Column Bearing
    Q:
    What parts are installed after lubricating the inner race for the 2008 Cadillac Escalade ESV? Posted by Customer
    A:
    The steering shaft upper bearing inner race, inner race seat, and spring.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Upper Steering Column Bearing
    Q:
    What lubrication is required for the inner race for the 2007 Cadillac Escalade EXT? Posted by Customer
    A:
    Lubricate the inner race with GM P/N 12345718 (Canadian P/N 10953516).
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Upper Steering Column Bearing
    Q:
    How do you install the new steering shaft upper bearing for the 2008 Chevrolet Colorado? Posted by Customer
    A:
    Place the new steering shaft upper bearing into the steering column tilt head housing.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Upper Steering Column Bearing
    Q:
    What is the torque specification for the intermediate shaft seal upper retaining screws for the 2004 Chevrolet Express 1500? Posted by Customer
    A:
    2 Nm (18 inch lbs.).
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Upper Steering Column Bearing
    Q:
    How do you connect the intermediate shaft bearing during installation for the 2008 Chevrolet Express 2500? Posted by Customer
    A:
    Connect it to the upper intermediate shaft and to the studs on the cowl.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Upper Steering Column Bearing
    Q:
    What should be done with the cruise control module after installation for the 2003 Chevrolet Express 3500? Posted by Customer
    A:
    Reposition it and install its mounting nuts, tightening them to 5 Nm (44 inch lbs.).
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Upper Steering Column Bearing
    Q:
    What is the first step to replace the steering shaft upper bearing for the 2009 Chevrolet Silverado 1500? Posted by Customer
    A:
    First, remove the steering column.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Upper Steering Column Bearing
    Q:
    What components should be installed after lubricating the inner race for the 2009 Chevrolet Tahoe? Posted by Customer
    A:
    The steering shaft upper bearing inner race, inner race seat, spring, and the turn signal switch cancel cam.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Upper Steering Column Bearing
    Q:
    What is the first step to replace the steering shaft upper bearing for the 2009 GMC Canyon? Posted by Customer
    A:
    Remove the steering column tilt head housing.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Upper Steering Column Bearing
    Q:
    What is the torque specification for securing the upper intermediate shaft for the 2007 GMC Savana 3500? Posted by Customer
    A:
    Secure it with the intermediate shaft bearing retaining bolt at 30 N.m (22 lb ft).
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Upper Steering Column Bearing
    Q:
    What parts are taken out from the steering column shaft assembly for the 2010 GMC Sierra 1500? Posted by Customer
    A:
    The turn signal switch cancel cam position plate, turn signal switch cancel cam, steering shaft upper bearing spring, steering shaft upper bearing inner race seat, and steering shaft upper bearing inner race.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Upper Steering Column Bearing
    Q:
    What should be removed after the retaining bolt for the 2003 GMC Savana 2500? Posted by Customer
    A:
    The intermediate shaft bearing bracket retaining nuts and the intermediate shaft lower brace retaining nut.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Upper Steering Column Bearing
    Q:
    What should be done after removing the intermediate shaft seal for the 2010 GMC Savana 1500? Posted by Customer
    A:
    Remove the intermediate shaft bearing bracket retaining nuts and the intermediate shaft lower brace retaining nut, then take out the intermediate shaft bearing from the studs on the cowl and disconnect it from the upper intermediate shaft.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Upper Steering Column Bearing
    Q:
    What parts are taken out from the steering column shaft assembly for the 2010 GMC Yukon? Posted by Customer
    A:
    The turn signal switch cancel cam position plate, turn signal switch cancel cam, steering shaft upper bearing spring, steering shaft upper bearing inner race seat, and steering shaft upper bearing inner race.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Upper Steering Column Bearing
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Shaft Bearings 26001827 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 26001827 Shaft Bearings is available in the market under the name GM Upper Steering Column Bearing. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 26001827 Shaft Bearings fits certain Chevrolet S10, Colorado, C10 models, as well as GMC Sierra 1500, Yukon, Canyon. Additionally, it is compatible with Cadillac Escalade, Allante, DTS and Buick Regal, LaCrosse, Lucerne models.
The original GM component designated by Manufacturer Part Number 26001827 maintains top performance when functioning as the Bearing Assembly, Steering Column unit at its Upper. The component 26001827 is constructed from durable material and its dimensions span 1.4 x 1.5 x 0.4 inches while weighing 0.40 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Bearing Assembly; Bearing Kit; Housing Bearing; Upper/Lower Bearings; Steering Column Bearings.. The part 26001827 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts? Our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.