Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 12471586
Axle Seal, Front Inner

1997-2014 GM

Customer Questions & Expert Answers (12)
GM 12471586 Axle Seal, Front Inner
GM 12471586 Axle Seal, Front Inner
GM 12471586 Axle Seal, Front Inner
GM 12471586 Axle Seal, Front Inner
  • Part Description
    Seal, Front Drive Axle Inner Shaft
  • Position
    Front Inner
  • Replaces
    12471680, 26053322
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits

  • 12471586 Axle Seal, Front Inner is Ref No. 4 in the diagram below

    1999 Chevy Blazer Axle Seal, Front Inner Diagram for 12471586
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 12471586

  • Vehicle Fitment

    Year Make Model Trim Engine
    1997-2005 Chevrolet AstroBase, LS, LT6 Cyl 4.3 L GAS
    1997-2005 Chevrolet BlazerBase, LS, LT, Trailblazer, Xtreme, ZR26 Cyl 4.3 L GAS
    2003-2014 Chevrolet Express 1500Base, LS, LT6 Cyl 4.3 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2003-2014 Chevrolet Express 2500Base, LS, LT6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
    2003-2014 Chevrolet Express 3500Base, LS, LT8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
    1997-2004 Chevrolet S10Base, LS, SS, Xtreme, ZR2, ZR54 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
    1997-2001 GMC JimmyDiamond Edition, Envoy, SL, SLE, SLS, SLT6 Cyl 4.3 L GAS
    1997-2005 GMC SafariBase, SL, SLE, SLT, SLX6 Cyl 4.3 L GAS
    2003-2014 GMC Savana 1500Base, LS, LT, SLE6 Cyl 4.3 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2003-2014 GMC Savana 2500Base, LS, LT, SLE6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
    View More
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Is this 12471586 designed for my car? Posted by ChevyPartsDeal Specialist
    A:
    Please Select Your Vehicle model to see if part number 12471586 is suitable before ordering.
    Posted by ChevyPartsDeal Specialist
    Q:
    What steps should be followed for the left side replacement for the 2004 Chevrolet Blazer? Posted by Customer
    A:
    Remove the left inner axle shaft, then the inner axle shaft seal cover. Attach the Bushing and Bearing Remover (J29369-1) to the backside of the inner axle shaft bearing, connect the Slide Hammer (J23907) to it, and pull to remove the bearing. Secure the inner axle shaft seal cover in a vise, then use the Bushing and Bearing Remover (J29369-1) to remove the inner axle shaft seal.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Wheel Seal
    Q:
    What are the final steps after installing the axle shaft seal and bearing for the 2004 Chevrolet Astro? Posted by Customer
    A:
    Reinstall the axle shaft, the rear axle housing cover, and the tire and wheel assembly. Finally, fill the rear axle with the appropriate fluid and lower the vehicle.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Wheel Seal
    Q:
    What are the steps for replacing the right side seal or bearing for the 2004 Chevrolet Express 1500? Posted by Customer
    A:
    Remove the inner shaft and housing assembly, then the inner shaft from the housing. Secure the inner shaft housing in a vise, attach the Bushing and Bearing Remover (J29369-1) to the backside of the seal or bearing, and use the Slide Hammer (J02619-1) to remove it.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Wheel Seal
    Q:
    What is the first step to replace the Front Drive Axle Inner Shaft Seal and Inner Shaft Bearing for the 2009 Chevrolet Express 3500? Posted by Customer
    A:
    Raise the vehicle and drain the differential carrier assembly.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Wheel Seal
    Q:
    What is required if replacing the left side bearing for the 2009 Chevrolet Express 2500? Posted by Customer
    A:
    Remove the differential carrier assembly, the left inner shaft, and the inner shaft seal cover bolts and assembly.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Wheel Seal
    Q:
    What steps should be followed for the left side replacement for the 2004 Chevrolet S10? Posted by Customer
    A:
    Remove the left inner axle shaft, then the inner axle shaft seal cover. Attach the Bushing and Bearing Remover (J29369-1) to the backside of the inner axle shaft bearing, connect the Slide Hammer (J23907) to it, and pull to remove the bearing. Secure the inner axle shaft seal cover in a vise, then use the Bushing and Bearing Remover (J29369-1) to remove the inner axle shaft seal.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Wheel Seal
    Q:
    What are the final steps after installing the axle shaft seal and bearing for the 2004 GMC Safari? Posted by Customer
    A:
    Reinstall the axle shaft, the rear axle housing cover, and the tire and wheel assembly. Finally, fill the rear axle with the appropriate fluid and lower the vehicle.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Wheel Seal
    Q:
    What are the final steps after installing the axle shaft seal and bearing for the 2007 GMC Savana 2500? Posted by Customer
    A:
    Install the axle shaft, fill the rear axle with lubricant, and lower the vehicle.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Wheel Seal
    Q:
    What should be ensured before proceeding with installation for the 2010 GMC Savana 1500? Posted by Customer
    A:
    Ensure the axle shaft bearing is fully seated in the rear axle shaft housing.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Wheel Seal
    Q:
    How do you ensure the retaining ring is properly seated for the 2009 GMC Savana 3500? Posted by Customer
    A:
    Tap the retaining ring into the groove using a soft-faced mallet, ensuring it is fully seated, then pull back to confirm proper retention.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Wheel Seal
    Q:
    What steps should be followed for the right side replacement for the 2004 GMC Sonoma? Posted by Customer
    A:
    Remove the inner axle shaft and housing assembly, then the inner axle shaft from the housing. Use the Bushing and Bearing Remover (J29369-1) and Slide Hammer (J23907) to remove the bearing and seal.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Wheel Seal
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Axle Seal, Front Inner 12471586 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 12471586 Axle Seal, Front Inner is available in the market under the name GM Wheel Seal. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 12471586 Axle Seal, Front Inner fits certain Chevrolet S10, Blazer, Astro models, as well as GMC Sonoma, Jimmy, Safari. Additionally, it is compatible with Oldsmobile Bravada models.
The original GM component designated by Manufacturer Part Number 12471586 maintains top performance when functioning as the Seal, Front Drive Axle Inner Shaft unit at its Front Inner. The component 12471586 is constructed from durable material and its dimensions span 3.1 x 3.2 x 1.0 inches while weighing 0.50 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Output Shaft Seal; Axle Seals; Seal; Seal, Front Axle. The part 12471586 has available replacement options 12471680, 26053322. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts? Our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.